Picture View Pool Screen Cage & Footing (Project #4515) – Leafmore St, Lutz, FL
This Lutz pool screen cage covers a 49 × 28 ft pool deck with a bronze aluminum frame, a mansard roof, and No-See-Um mesh. The Picture View front wall keeps the pool and yard in view, and a reinforced concrete footing carries the frame. The permit stage took 2 weeks, and installation took about 10 days.
Project Overview
At a home on Leafmore St in Lutz, the homeowners wanted to use their pool deck without insects. Project #4515 added a new pool screen cage that is 49 ft wide and up to 28 ft deep, with a total structure area of about 2,360 sq. ft. The frame is bronze aluminum, with 10 ft 7 in. walls and an overall height of 13 ft 7 in. under the roof.
The long front wall is designed as a Picture View elevation. Wide screen panels span the 49 ft wall, so the pool and the yard stay in view from the patio. Cable bracing stiffens the wall and the sides, and the engineering plans mark it for every elevation.
A mansard roof with 2 × 6 and 2 × 7 SMB beams and a double 2 × 10 SMB header covers the cage. A 7-inch Super Gutter connects the roof to the house and carries rain away through downpipes. Stainless steel screws and anchors resist corrosion in Florida’s humid climate, and the posts, beams, and bracing share one bronze finish. Lighting fixtures on the posts light the pool deck in the evening.
A reinforced concrete footing carries the frame, and the posts are anchored through the pavers into it. No-See-Um 20/20 mesh covers the walls and roof, keeping out small insects while keeping airflow and daylight in the space. Every property needs its own measurements and estimate, so the figures here describe this installation only.
Homeowners considering a similar upgrade can explore our screen enclosures in the Tampa area.
Permitting took about 2 weeks: the application was submitted on June 11, 2026, and the permit was received on June 24, 2026. Installation ran from August 10 to August 19, 2026, and Project #4515 was reported at a cost of around $22,000. The cage turned the pool deck into a cleaner, more comfortable outdoor living space, protected from insects and open to airflow and daylight.
Before & After


Reinforced Concrete Footing for This Pool Screen Cage
A pool screen cage that stands on a paver deck needs a solid base under the frame. Before the aluminum went up, our crew excavated a trench along the deck edge, set the reinforcing steel, and poured a 12 × 12 inch monolithic concrete footing, as shown in the engineering plans for this project.
The footing details call for 3000 PSI concrete and two continuous #5 bars with 3 inches of concrete cover over the steel. The rebar was set in the trench before the concrete was placed, so the steel sits inside the footing instead of on top of it.
Once the footing was in place, the pavers were set back along the edge. The aluminum posts are anchored through the pavers into the footing, with anchors that penetrate at least 2¾ inches into the concrete, as specified on the plans. The finished surface looks clean and simple; underneath it is the reinforced foundation supporting this 49 ft wide pool screen cage.
Post-Mounted Lighting for This Pool Screen Cage
This pool screen cage was fitted with lighting so the pool deck stays usable after sunset. Black cylinder fixtures are mounted directly on the aluminum posts and cast a cyan-blue light downward along the posts and over the deck.
Mounting the fixtures on the posts keeps the lighting tied to the structure, so the Picture View wall stays open and uncluttered. The photos taken at dusk show the fixtures lit, with the glow marking the posts and the paver deck.
You can learn more about fixture options, placement, color temperatures, and planning in our article: Pool Cage Lighting Ideas for Florida Homes.

How We Did It
Project #4515 followed the complete design-build sequence for a pool screen cage and footing in Lutz. After an on-site consultation and measurements, the team confirmed a 49 × 28 ft layout with a mansard roof, a Picture View front wall, and a concrete footing. The 3D visualization, site plan, and engineering plans came next. Permitting took about 2 weeks, followed by footing work, material preparation, and a 10-day installation. The work was completed on August 19, 2026, and the finished cage moved into warranty and ongoing company support. The six stages below describe how the planning, materials, and construction came together.
Our specialist visited the Lutz property to evaluate the pool deck, the rear wall of the house, the roofline, and the surrounding yard. Measurements were taken for the 49 × 28 ft cage and its Picture View front wall. During this stage, the homeowners selected the bronze aluminum finish, the mansard roof design, No-See-Um mesh, and the 7-inch Super Gutter connection. After the scope, materials, pricing, and timeline were confirmed, the contract was finalized. This visit set the foundation for every later stage, from design to permit and installation.

Using the field measurements, the team prepared a 3D visualization, a site plan, and engineering plans for the cage. The plans show the 49 × 28 ft layout, the mansard roof, the 2 × 6 and 2 × 7 SMB beams, the double 2 × 10 SMB header, the cable bracing, the 7-inch Super Gutter, and the concrete footing with its anchor details. This planning stage let the homeowners review the proportions before construction began, and it fixed how each frame member connects to the footing and the house. The same documents were used to prepare the permit application.

Once the design and engineering documentation were complete, the permit package was prepared and submitted for review. The team coordinated the site plan and engineering plans for the Lutz pool screen cage, including the footing and anchor details. The application was submitted on June 11, 2026, and the permit was received on June 24, 2026, about 2 weeks later. Review periods differ by property, so another project may need a different timeline.

Materials were prepared according to the engineering plans before installation began at the property. After the footing and the paver deck were in place, the installers assembled the bronze aluminum frame, set the mansard roof structure, and anchored the posts through the pavers into the footing. The 7-inch Super Gutter was connected to the house, cable bracing was installed, and No-See-Um mesh was fitted to the walls and roof. The access doors were installed with their hardware. Installation ran from August 10 to August 19, 2026. Each step followed the engineering drawings.

After installation, the team checked the screen fit, access door operation, frame connections, anchor points, cable bracing, Super Gutter, and overall finish. The completed cage covers a 49 × 28 ft pool deck under a mansard roof, with No-See-Um mesh across the walls and roof. The homeowners could then see how the bronze frame and screen defined the pool area. Project #4515 was completed on August 19, 2026. The enclosure was then ready for everyday use by the family.

Following the final handover, the completed pool screen cage was placed under Screen Factory Florida’s warranty and ongoing support. The installed No-See-Um mesh typically carries a manufacturer’s material warranty of about 5 years, while our team remains available to assist with questions related to the screen panels, the access doors, the hardware, or other installed components. The homeowners can now enjoy a protected, screened pool deck with dependable support after installation.

Want a Similar Result?
Get a free estimate for your project —
we’ll call you back within 15 minutes.
Design, Permits & Project Planning
Project #4515 brought a bronze pool screen cage to a home on Leafmore St in Lutz. The structure measures 49 ft by up to 28 ft, has a mansard roof, and includes a Picture View front wall. Planning covered the 2 × 6 and 2 × 7 SMB beams, the double 2 × 10 SMB header, the cable bracing, No-See-Um mesh, the 7-inch Super Gutter connection to the house, and the reinforced concrete footing with anchors through the pavers. The 3D visualization and site plan confirmed the proportions and placement before construction. Permitting took about 2 weeks, and installation took about 10 days, so the project was completed on August 19, 2026.
The engineering package defined the structural requirements for the 49 × 28 ft pool screen cage, including the mansard roof geometry, the 2 × 6 and 2 × 7 SMB beam layout, the double 2 × 10 SMB header, cable bracing, and attachment to the house through a 7-inch Super Gutter. It also specified the foundation: a 12 × 12 inch monolithic footing with two #5 bars and anchors that penetrate the pavers into the footing. Each member is labeled by size on the plans, and the legend marks the cable bracing. The package was prepared for permit review, which took about 2 weeks. The drawings show plan, front, and side views with dimensions.

The 3D model provided a clear preview of the pool screen cage before fabrication and installation began. It showed the mansard roof, the bronze frame, the Picture View front wall, the cable bracing, the access doors, the downpipes, and how the structure connects to the house. Reviewing these views together with the plans helped confirm the proportions and placement before construction began. The model also shows the cage over the pool from several angles, including the roofline, the way the frame meets the house wall, and the door positions, which made it easier to judge the layout before anything was built. The views show the long wall clearly.

The site plan placed the new pool screen cage at the rear of the single-family residence on its lot. It shows the 49 ft wide structure, its distances to the property lines, with about 12.4 ft to the side line on one side and 22 ft on the other, and the lot outline, which covers about 0.2 acres, with a north arrow, so the position of the structure could be checked against the boundaries. It supported permit coordination and confirmed where the cage sits on the lot before the footing was excavated. These dimensions let the team verify the layout before the footing work began. The drawing also marks the house outline next to the structure.

Frequently Asked Questions
Answers to common questions about pool screen cages in Lutz, including cost, permits, Picture View walls, timelines, and maintenance.
How much does a pool screen cage with a concrete footing cost in Florida?
The cost depends on the size of the structure, the frame finish, the roof style, the screen type, the number of doors, and the foundation work. A footing adds excavation, steel, and concrete to the scope, so a cage that needs one costs more than a frame set on an existing slab. For Project #4515 in Lutz, the reported cost was around $22,000 for a 49 × 28 ft pool screen cage with a mansard roof, No-See-Um mesh, a 7-inch Super Gutter, a Picture View front wall, and a reinforced concrete footing. That figure describes this installation only. The most reliable way to price your own cage is an on-site visit, a measured scope, and a written estimate that lists the foundation and every feature included.
Do you need a permit to build a pool screen cage in Florida?
In most cases, yes. A pool screen cage is a structure, and Florida counties and cities generally review it before construction, including the foundation details. Requirements differ by location, so check with the local building department or ask your contractor to confirm them for your address. For Project #4515 in Lutz, the application was submitted on June 11, 2026, and the permit was received on June 24, 2026, about 2 weeks later. Another project may take more or less time, depending on the property, the complexity of the structure, and how complete the application is when it is submitted. A contractor who prepares the site plan and engineering plans can keep the schedule clear.
What is a Picture View wall on a pool screen cage?
A Picture View wall uses fewer, wider screen panels, so fewer posts cut across the view. On Project #4515, the 49 ft front wall uses wide panels between 6 × 6 posts, with cable bracing and a double 2 × 10 SMB header carrying the long span, and the engineering plans show both. The trade-off is a stronger frame in exchange for a cleaner view of the pool and yard. Ask your contractor which opening widths suit your cage and how they will be braced, since every structure is engineered for its own dimensions. Ask to see where the plans mark the posts and bracing for the long span. That is why the Picture View wall is shown on the engineering plans together with the frame.
How long does it take to build a pool screen cage with a footing?
The timeline has several parts: the permit stage, the footing work, and the installation of the frame and screen. On Project #4515 in Lutz, permitting took about 2 weeks and the installation took about 10 days, from August 10 to August 19, 2026. The footing needs time to be excavated, reinforced, poured, and cured before the posts are anchored, so it should be scheduled before the aluminum arrives. Before you sign a contract, ask for the expected permit window and the installation schedule in writing, and ask how weather could move the dates. Footing work and paver repairs add time compared with a frame set on an existing slab.
How do you take care of a pool screen cage on a paver deck?
Rinse the screen panels and the frame with a garden hose from time to time to remove dust, pollen, and debris. Check the mesh for small tears and repair them early, because a small opening can grow. Open and close the access doors to confirm that the hinges and latches move smoothly, and inspect the frame connections and fasteners after major storms. On a paver deck, keep the joints between the pavers and the base of the posts clear of dirt and weeds. Keep the gutter and downspouts clear so water does not collect against the frame. For questions about this installation, contact Screen Factory Florida and reference Order #4515.
More projects
Explore more screen enclosure and pool cage projects in the Florida area.
Our Services
From custom pool enclosures and screened lanais to motorized screens and hurricane shutters, we create outdoor spaces made for the Florida lifestyle. Every solution combines lasting protection, everyday comfort, and clean design – so you can enjoy more fresh air, fewer insects, and peace of mind in any weather.
Hi, I'm Alex, your project consultant. Fill in the details and I'll personally get back to you today.




















