15-Balcony Screen Enclosure (Project #20626) – Tranquility Lake Cir, Riverview, FL

Custom Screen Enclosures
map_check_alt Riverview
calendar_alt November 11, 2026
size_alt 1,320 sq. ft. structure area; 15 balconies; white aluminum frames
15 Balconies Screened
White Aluminum Frames
No-See-Um Mesh
No Permit Required

This Riverview project added screen enclosures to 15 ground-floor balconies, about 1,320 sq. ft. in total. White aluminum frames hold No-See-Um 20/20 mesh, which keeps out small insects while letting air and daylight through. No permit was required, and the work was completed in stages from June to November 2026.

Project Value: Around $15,000
Riverview balcony screen enclosure after project 20626
Riverview balcony screen enclosure angled opening 20626
Riverview balcony screen enclosure corner view 20626
Riverview balcony screen enclosure french doors view 20626
Riverview balcony screen enclosure ground floor opening 20626
Riverview balcony screen enclosure near pond 20626
Riverview balcony screen enclosure tall opening 20626
Riverview balcony screen enclosure with landscaping 20626
Riverview balcony with furniture before screen enclosure 20626
Riverview building corner before screen enclosure 20626
Riverview open balcony before screen enclosure 20626
Riverview open balcony with white railing before screen enclosure 20626
Riverview white aluminum frames laid out on lawn 20626
Riverview balcony screen enclosure after project 20626
Riverview balcony screen enclosure angled opening 20626
Riverview balcony screen enclosure corner view 20626
Riverview balcony screen enclosure french doors view 20626
Riverview balcony screen enclosure ground floor opening 20626
Riverview balcony screen enclosure near pond 20626
Riverview balcony screen enclosure tall opening 20626
Riverview balcony screen enclosure with landscaping 20626
Riverview balcony with furniture before screen enclosure 20626
Riverview building corner before screen enclosure 20626
Riverview open balcony before screen enclosure 20626
Riverview open balcony with white railing before screen enclosure 20626
Riverview white aluminum frames laid out on lawn 20626
01
/
01

Project Overview

At a residential community on Tranquility Lake Cir in Riverview, the homeowners wanted their ground-floor balconies to stay usable without insects getting in. Project #20626 added screen enclosures to 15 open balconies, with a combined structure area of about 1,320 sq. ft. The buildings stand next to a pond, so small insects are a fair concern there.

Each balcony received a white aluminum frame built from 2 × 2 patio tube and 1 × 2 open-back sections, with a receiving channel that holds the mesh. The white finish follows the white trim of the buildings, so the enclosures sit within the existing facade instead of standing out from it.

The mesh is No-See-Um 20/20, a finer weave than Regular screen, held in the frames with flat spline. White galvanized steel screws fasten the frames. A finer mesh lets in slightly less air than Regular screen, which is a fair trade for a lakeside building where small insects are the main concern.

Because the order covered 15 balconies, the work was done in stages rather than all at once. Every opening needs its own measurements and estimate, so the figures here describe this installation only.

Homeowners considering a similar upgrade can explore our screen enclosures in the Tampa area.

No permit was required for this scope. The work was completed in stages from June to November 2026, with the final balconies finished on November 11, 2026. Project #20626 was reported at a cost of around $15,000. The balconies are now protected from insects while staying open to airflow and daylight.

Before & After

Before
After
Riverview balcony before screen enclosure project 20626
Riverview balcony screen enclosure after project 20626

How We Did It

Project #20626 followed a phased design-build sequence for balcony screen enclosures in Riverview. After an on-site visit and measurements, the team planned the layout of the 15 balconies and prepared white aluminum frames with No-See-Um mesh. No permit was required, so the work moved from planning to material preparation and installation. Installation ran in stages from June to November 2026, and the project was completed on November 11, 2026. The six stages below describe how the planning, materials, and construction came together.

01
On-Site Consultation, Measurements & Contract

Our specialist visited the Riverview community to evaluate the ground-floor balconies and the surrounding grounds. Measurements were taken for each opening and recorded on a screening planning worksheet. During this stage, the homeowners selected the white aluminum frames and No-See-Um 20/20 mesh. After the scope, materials, pricing, and timeline were confirmed, the contract was finalized. This visit set the foundation for every later stage, from planning to installation.

On-Site Consultation, Measurements & Contract
02
3D Visualization & Engineering Design

Using the field measurements, the team planned the frame layout for each of the 15 balconies, including the width and height of every opening, the frame sections, and the mesh panels. The planning was based on the measurements and the screening worksheet. This stage let the homeowners confirm the layout and the white finish before fabrication began, and it fixed how each frame fits its opening.

3D Visualization & Engineering Design
03
Permit Application & Approval

No permit was required for this project, so the work moved from planning straight into material preparation and installation. Requirements depend on the property and the scope of the work, so another project may need a permit. It is worth confirming with the local building department, and with the property association if there is one, before work begins.

Permit Application & Approval
04
Material Preparation & Enclosure Installation

Materials were prepared according to the measurements before installation began at the property. The installers assembled the white aluminum frames, fitted the receiving channel, and set No-See-Um 20/20 mesh into each frame with flat spline. Galvanized steel screws fasten the frames. Because the order covered 15 balconies, installation was carried out in stages from June to November 2026.

Material Preparation & Pool Enclosure Installation
05
Final Inspection & Client Handover

After installation, the team checked the mesh tension, frame connections, fasteners, and overall finish on each balcony. The completed enclosures use No-See-Um 20/20 mesh in white aluminum frames that follow the white trim of the buildings. Project #20626 was completed on November 11, 2026. The balconies were then ready for everyday use.

Final Inspection & Client Handover
06
Warranty & Ongoing Project Support

Following the final handover, the completed balcony enclosures were placed under Screen Factory Florida’s warranty and ongoing support. The installed No-See-Um mesh typically carries a manufacturer’s material warranty of about 5 years, while our team remains available to assist with questions related to the mesh, the frames, the fasteners, or other installed components. The homeowners can now use their balconies with dependable support after installation.

Warranty & Ongoing Project Support

Want a Similar Result?

Get a free estimate for your project —
we’ll call you back within 15 minutes.

Design, Permits & Project Planning

Project #20626 brought white screen enclosures to 15 ground-floor balconies at a residential community on Tranquility Lake Cir in Riverview. Together they cover about 1,320 sq. ft. of structure area. Planning covered the white aluminum frames, the receiving channel, flat spline, and No-See-Um 20/20 mesh, which blocks small insects near the pond. Galvanized steel screws hold the frames in place. The buildings stand beside a pond, which is why a fine mesh was chosen. No permit was required for this scope. The work moved in stages from June to November 2026, and the project was completed on November 11, 2026.

15-Balcony Screen Project
White Aluminum Frames
No-See-Um Balcony Screens
No Permit Required
Riverview Balcony Screens
Built Right. Approved. Protected.

We engineer every enclosure to meet the strict 8th Edition Florida Building Code (2023), designed to meet applicable Florida Building Code structural and wind-load requirements.

Frequently Asked Questions

Answers to common questions about balcony screen enclosures in Riverview, including cost, permits, mesh choice, timelines, and maintenance.

How much does it cost to screen in a balcony in Florida?

The cost depends on the number and size of the openings, the frame finish, the mesh type, and how the frames attach to the building. Several balconies in one order are priced as one scope, so the cost per opening can differ from a single-balcony job. For Project #20626 in Riverview, the reported cost was around $15,000 for 15 ground-floor balconies, about 1,320 sq. ft. in total, with white aluminum frames and No-See-Um 20/20 mesh. That figure describes this installation only. The most reliable way to price your own balcony is a measured visit and a written estimate that lists the frames, the mesh, and the labor.

Do you need a permit to screen in a balcony in Florida?

It depends on the scope of the work and the location, so check before you start. For Project #20626 in Riverview, no permit was required. Other balcony projects may need one, particularly when the work changes the structure of the building. Florida counties and cities set their own rules, so ask the local building department or your contractor to confirm the requirements for your address. In a community with an association, you may also need written approval for the frame color and the mesh before work begins. Confirming this early keeps the schedule clear, and keeping the written approval with your project records helps if questions come up later.

What mesh works best for a balcony near water?

Near a pond or lake, small insects such as no-see-ums are the main concern, so a finer mesh makes sense. No-See-Um 20/20 has a finer weave than Regular 18/14 screen and blocks the smaller insects. The trade-off is slightly lower airflow than Regular screen. Project #20626 uses No-See-Um 20/20 on all 15 balconies, held in white aluminum frames with flat spline. If airflow matters more to you than the smallest insects, Regular screen may suit you better, so ask your contractor to explain the difference for your location. Either choice works with the same white aluminum frames, so the decision comes down to the view, the airflow, and the insects you most want to keep out.

How long does it take to screen in several balconies?

The timeline depends on the number of openings, access to each balcony, and the schedule of the people who use them. On Project #20626 in Riverview, the installation was carried out in stages from June to November 2026, and the project was completed on November 11, 2026. A job of this size does not run at the pace of a single patio, so the schedule should be agreed in writing before work begins. Ask how the work will be staged, how many balconies are done at a time, and how weather could move the dates. Phased work can also let residents keep using the balconies that are not under way. A single balcony is a smaller scope, so ask for the schedule that matches your own number of openings.

How do you take care of a balcony screen enclosure?

Rinse the mesh and the frames gently with a garden hose from time to time to remove dust, pollen, and debris, because a strong spray can stretch or damage the mesh. Check the mesh for small tears and repair them early, because a small opening can grow. Check the spline along the frame edge for loose sections. Inspect the frame connections and fasteners after major storms, and keep plants and shrubs trimmed back from the frames so they do not rub against the mesh. Keep the area around the base of the frames clear of dirt and mulch. For questions about this installation, contact Screen Factory Florida and reference Order #20626.

More projects

Explore more screen enclosure and pool cage projects in the Florida area.

Our Services

From custom pool enclosures and screened lanais to motorized screens and hurricane shutters, we create outdoor spaces made for the Florida lifestyle. Every solution combines lasting protection, everyday comfort, and clean design – so you can enjoy more fresh air, fewer insects, and peace of mind in any weather.

form-user-alt
Alex Martin
Senior Project Consultant, Screen Factory Florida
greetings-img Hi, I'm Alex, your project consultant. Fill in the details and I'll personally get back to you today.
Whether you need a free estimate or have questions about your project, just fill out the form - I'll personally get back to you today.
Name
Error
Phone
Error
Email
Error
Service Needed
Error
City
Error
Zip
Error
Address (Optional)
Error
Message (optional)
0/1000
Error
I have read and agree to the Privacy Policy and Terms of Service.