Screen Lanai (Project #4293) – Flourish Dr, Land O’ Lakes, FL
Land O' Lakes
July 10, 2026
22 × 6 ft footprint; 132 sq. ft. of screened space; 8 ft height
This Land O’ Lakes screen lanai closes a 22 × 6 ft covered patio with a dark bronze aluminum frame and Super Screen and Florida Glass panels set between the existing columns and walls. The enclosure is 8 ft high, keeps the home’s roof in place, and includes an access door with a transom. The permit stage took 3 weeks, and the installation took 2 weeks.
Project Overview
At the Flourish Drive home in Land O’ Lakes, the homeowners wanted to use their covered patio without insects. Project #4293 turned it into a screen lanai by closing the open sides under the existing roof. The enclosure is 22 ft wide, 6 ft deep, and 8 ft high, which makes about 132 sq. ft. of screened space.
Because the roof already existed, the work focused on the frame and the screen. A dark bronze aluminum frame runs between the stucco columns and the house walls, and horizontal rails divide the openings into panels. The front is split into two bays of 11 ft each, so the layout follows the proportions of the existing patio.
An access door with a transom sits in the left bay and gives the family a direct route between the lanai and the yard. The openings face a backyard with open lawn and trees, and the screen keeps that outlook while blocking insects.
Super Screen covers the front bays, and Florida Glass panels close the right side, adding privacy and some protection from wind and rain. The existing paver floor stayed as it was. The project photos show the open patio before the work and the finished lanai after it. Every property needs its own measurements and estimate, so the figures here describe this installation only.
Homeowners considering a similar upgrade can explore our screen lanai enclosures in Tampa.
The permit stage took 3 weeks, and installation took 2 weeks. Finished on July 10, 2026, Project #4293 was reported at a cost of around $2,000. The enclosure turned the patio into a cleaner, more comfortable outdoor living space, protected from insects and open to airflow and daylight.
Before & After
How We Did It
Project #4293 followed the complete design-build sequence for a screen lanai in Land O’ Lakes. After an on-site consultation and measurements, the team confirmed a dark bronze aluminum frame, two 11 ft screen bays, and an 8 ft height under the existing roof. The 3D visualization and site plan came next. Permitting took 3 weeks, followed by material preparation and a 2-week installation. The work was completed on July 10, 2026, and the finished lanai moved into warranty and ongoing company support. The six stages below describe how the planning, materials, and construction came together for this screened patio.
Our specialist visited the Land O’ Lakes property to evaluate the covered patio, the existing columns, the house walls, and the backyard. Measurements were taken for the new 22 × 6 ft enclosure at 8 ft in height. During this stage, the homeowners selected the dark bronze aluminum finish, Super Screen, Florida Glass panels, and the access door with a transom. After the scope, materials, pricing, and timeline were confirmed, the contract was finalized. This visit set the foundation for every later stage, from design to permit and installation.
Using the field measurements, the team prepared a 3D visualization of the lanai and a site plan. The drawings show the two 11 ft bays, the 8 ft height, the 6 ft depth, the Super Screen and Florida Glass sides, and the position of the access door in the left bay. This planning stage let the homeowners review the proportions before construction began, and it fixed how each frame member fits the existing columns and walls. The same documents were used to prepare the permit application.
Once the design was complete, the permit package was prepared and submitted for review. The team coordinated the site plan and the drawings for the Land O’ Lakes lanai, covering the frame, the screen layout, and the access door. The permit stage took 3 weeks, after which the project moved into material preparation and installation. Review periods differ by property, so another project may need a different timeline. Installation began only after the permit stage was complete.
Materials were prepared according to the project drawings before installation began at the property. The installers assembled the dark bronze aluminum frame between the existing columns and walls, set the horizontal rails, and installed the access door. Super Screen mesh and Florida Glass panels were then fitted into the frame. The complete installation took 2 weeks. Working in this order keeps the frame and the screen aligned, and each step followed the drawings.
After installation, the team checked the screen fit, access door operation, frame connections, and overall finish. The completed lanai covers 22 × 6 ft under the existing roof, with Super Screen on the front and Florida Glass on the right side. The homeowners could then see how the dark bronze frame and screen defined the patio. Project #4293 was completed on July 10, 2026. The enclosure was then ready for everyday use by the family.
Following the final handover, the completed lanai was placed under Screen Factory Florida’s warranty and ongoing support. Our team remains available to assist with questions related to the screen panels, the access door, hardware, or other installed components. The homeowners can now enjoy a protected, screened patio with dependable support after installation. Super Screen typically carries a manufacturer’s material warranty of about 10 years, and Florida Glass about 5 years.
Want a Similar Result?
Get a free estimate for your project —
we’ll call you back within 15 minutes.
Design, Permits & Project Planning
Project #4293 brought a dark bronze screen lanai to a home on Flourish Drive in Land O’ Lakes. The enclosure measures 22 × 6 ft with an 8 ft height and sits under the existing roof. Planning covered the aluminum frame, the two 11 ft screen bays, the horizontal rails, the access door with a transom, Super Screen, and Florida Glass panels. The 3D visualization and site plan confirmed the proportions and placement before installation. The permit stage took 3 weeks, and installation took 2 weeks, so the project was completed on July 10, 2026. Together, these decisions defined the scope, the materials, and the schedule.
The project drawings defined the layout of the 22 × 6 ft lanai, including the two 11 ft bays, the 8 ft height, the horizontal rails, and the access door with a transom. The frame was planned to fit between the existing columns and the house walls, so the new structure follows the original building lines. The drawings gave the fabrication and installation crews one set of dimensions to work from, and the package was prepared for permit review, which took 3 weeks. The layout could then be checked against the structure during installation. These drawings also confirmed how the frame meets the existing roofline.
The 3D model provided a clear preview of the lanai before fabrication and installation began. It showed the dark bronze frame between the existing columns, the two 11 ft bays, the horizontal rails, the access door with a transom, and how the enclosure meets the house walls under the existing roofline. Reviewing these views together with the site plan helped confirm the proportions and placement before construction began. The model also shows the lanai from outside and from inside, including the left bay with the access door in position, which made it easier to judge the layout before anything was built.
The site plan placed the lanai at the rear of the existing single-family residence and marks it as the new design of the lanai. It shows the two 11 ft bays, the 6 ft depth, the clearance of about 5 ft to the side property line, and the 24.8 ft distance to the rear lot line. The plan also shows the lot outline along Flourish Drive with a north arrow, so the position of the structure could be checked against the boundaries. It supported permit coordination and confirmed exactly where the lanai sits on the 60 × 120 ft lot. These dimensions let the team verify the layout against the property boundaries before installation.
Frequently Asked Questions
Answers to common questions about screen lanais in Land O’ Lakes, including cost, permits, doors, paver floors, and maintenance.
How much does it cost to screen in a covered patio in Florida?
The cost depends on the size of the openings, the frame finish, the screen type, the number of doors, and the condition of the existing structure. A patio that already has a roof, columns, and a floor needs less work than a new enclosure with its own roof. For Project #4293 in Land O’ Lakes, the reported cost was around $2,000 for a 22 × 6 ft lanai that is 8 ft high, with a dark bronze aluminum frame, Super Screen, Florida Glass panels, and an access door. That figure describes this installation only. The most reliable way to price your own patio is an on-site visit, a measured scope, and a written estimate that lists the materials and features included.
Do you need a permit to screen in a lanai in Florida?
In most cases, yes. Closing the sides of a covered patio changes the structure, and Florida counties and cities generally review it before construction. Requirements differ by location, so check with the local building department or ask your contractor to confirm them for your address. For Project #4293 in Land O’ Lakes, the permit stage took 3 weeks before installation began. Another project may take more or less time, depending on the property and how complete the application is when it is submitted. A contractor who prepares the site plan and the drawings can keep the schedule clear from the start.
What is the difference between a screen lanai and a pool cage?
A screen lanai closes the openings of a covered patio under the existing roof of the house, so the frame sits between the columns and the walls and the home provides the roof. A pool cage is a separate structure with its own screened frame and roof, built over the pool deck. Project #4293 is a lanai: the roof, the columns, and the paver floor were already there, and the new dark bronze frame and screen closed the openings. Which option fits your home depends on the existing roof, the layout, and how much space you want to enclose. Ask your contractor to explain which option your home allows and what the permit will cover.
Can you screen in a lanai with a paver floor?
Yes, but the way the frame is anchored matters. Our standard is to anchor posts into concrete, not into loose pavers, because a frame fixed only to pavers can be pulled loose by wind. When a patio has pavers, the contractor needs to check what lies under them and choose the anchoring method accordingly. On Project #4293, the existing paver floor stayed in place. When you compare proposals, ask how the frame will be anchored on your floor and who verifies it. Pavers are often laid on sand, so the frame needs a solid base to carry wind loads. Ask your contractor to describe the anchoring in writing, including where the anchors go into concrete.
How do you maintain a screen lanai?
Rinse the screen panels and the frame with a garden hose from time to time to remove dust, pollen, and debris. Check the mesh for small tears and repair them early, because a small opening can grow. Open and close the access door to confirm that the hinges and latch move smoothly, and inspect the frame connections and fasteners after major storms. Aluminum frames resist rust, but any scratch or chip in the finish should be touched up. Wipe the floor edge where the screen meets the patio so leaves and dirt do not collect. For questions about this installation, contact Screen Factory Florida and reference Order #4293.
More projects
Explore more screen enclosure and pool cage projects in the Florida area.
Our Services
From custom pool enclosures and screened lanais to motorized screens and hurricane shutters, we create outdoor spaces made for the Florida lifestyle. Every solution combines lasting protection, everyday comfort, and clean design – so you can enjoy more fresh air, fewer insects, and peace of mind in any weather.
Hi, I'm Alex, your project consultant. Fill in the details and I'll personally get back to you today.