Two-Story Pool Screen Enclosure with Picture View (Project #20329) – Lake Lucaya Dr, Riverview, FL

Screen Pool Enclosure
map_check_alt Riverview
calendar_alt April 16, 2025
size_alt Approx. 2,204 sq. ft.
Mansard Roof
2×9 SMB Beams
Picture View Screen Wall
Super Screen Mesh

This Riverview pool screen enclosure transformed a lakeside backyard into an outdoor living space. The 2,204 sq. ft. project features a custom two-story enclosure with a mansard roof, 2 × 9 SMB beams, Super Screen, a 7-inch Super Gutter, and two access doors. Designed for Florida living, the finished enclosure provides insect protection, natural airflow, and effective rainwater management.

Project Value: Around $40,000
Riverview pool screen enclosure after 20329
Riverview pool screen enclosure exterior side view with fence 20329
Riverview pool screen enclosure exterior two story enclosure view 20329
Riverview pool screen enclosure interior mansard roof frame and pool 20329
Riverview pool screen enclosure interior pool and lake view through screen 20329
Riverview pool screen enclosure interior pool deck and roof frame 20329
Riverview pool screen enclosure interior pool edge and roof frame 20329
Riverview pool screen enclosure interior roof frame and lake view 20329
Riverview pool screen enclosure interior view toward balcony 20329
Riverview pool screen enclosure roof frame and lake view 20329
Riverview pool screen enclosure after 20329
Riverview pool screen enclosure exterior side view with fence 20329
Riverview pool screen enclosure exterior two story enclosure view 20329
Riverview pool screen enclosure interior mansard roof frame and pool 20329
Riverview pool screen enclosure interior pool and lake view through screen 20329
Riverview pool screen enclosure interior pool deck and roof frame 20329
Riverview pool screen enclosure interior pool edge and roof frame 20329
Riverview pool screen enclosure interior roof frame and lake view 20329
Riverview pool screen enclosure interior view toward balcony 20329
Riverview pool screen enclosure roof frame and lake view 20329
01
/
01

Project Overview

In Riverview, a pool this close to the water deserves a view that stays open. The homeowners wanted protection from insects and debris without a grid of vertical posts cutting across the lakefront scenery. The result was a custom two-story pool screen enclosure designed around a wide, unobstructed outlook.

The defining element is the Picture View screen wall. By reducing visual interruptions across the main elevation, it preserves the panoramic view from both the pool deck and the home. The mansard roof adds comfortable height and gives the 58-by-38-foot footprint a more open, balanced profile.

The bronze aluminum frame was built with 2-by-9 SMB beams, 2-by-10 SMB carrier beams, and support cables. Stainless steel screws and anchors add corrosion resistance in Florida’s humid climate, while a 7-inch Super Gutter connects the enclosure to the existing roofline and manages runoff during heavy rain.

The enclosure uses premium Super Screen mesh backed by a 10-year warranty. This durable screening helps keep out insects and windblown debris while maintaining airflow, visibility, and a comfortable connection to the waterfront setting. Two classic access doors provide simple routes between the pool area and the backyard.

Homeowners considering a similar upgrade can explore our pool screen enclosures in Riverview.

Permitting was completed within 2 weeks, and the full project timeline was 3 weeks. Finished on April 16, 2025, the enclosure transformed the pool area into a cleaner, more comfortable outdoor living space without sacrificing the view that makes this Riverview property special.

Before & After

Before
After
Riverview pool screen enclosure before 20329
Riverview pool screen enclosure after 20329

How We Did It

Project #20329 followed a complete design-build process, beginning with an on-site consultation and precise measurements of the Riverview pool area. After the materials and final 58 × 38 ft layout were approved, our team created the 3D visualization and engineering documentation for the two-story mansard enclosure and Picture View screen wall. The permit was approved within 2 weeks, followed by material preparation and installation. After the required final inspection and client walkthrough, the completed 2,204 sq. ft. pool enclosure was placed under warranty and ongoing company support.

01
On-Site Consultation, Measurements & Contract

Our specialist visited the Riverview property to evaluate the existing pool deck, roofline, structural connection points, and waterfront surroundings. Precise measurements were taken for the custom 58 × 38 ft two-story pool enclosure and Picture View screen wall. During this stage, the homeowners selected the bronze aluminum finish, premium Super Screen mesh, mansard roof design, 7-inch Super Gutter, and two classic access doors. After the scope, materials, pricing, and timeline were confirmed, the contract was finalized.

On-Site Consultation, Measurements & Contract
02
3D Visualization & Engineering Design

Using the field measurements, our team developed a detailed 3D visualization showing how the new two-story enclosure would connect to the home and preserve the panoramic waterfront view. The engineering documentation specified a mansard roof with 2 × 9 SMB beams and 2 × 10 SMB carrier beams, a wide Picture View opening, support cables, stainless steel screws and anchors, and the required structural connections. This planning stage allowed the homeowners to review the finished appearance before construction began.

3D Visualization & Engineering Design
03
Permit Application & Approval

Once the design and engineering documentation were complete, the permit package was prepared and submitted for review. Our team coordinated the required plans and supporting documents for the Riverview pool enclosure, addressing the structural details of the mansard frame, Super Gutter connection, and panoramic screen wall. The permit was approved within 2 weeks, allowing the project to move into material preparation and construction.

Permit Application & Approval
04
Material Preparation & Pool Enclosure Installation

Materials were prepared according to the approved engineering plans before installation began at the property. Our installers connected the 7-inch Super Gutter to the existing roofline and assembled the bronze aluminum mansard frame using 2 × 9 SMB beams and stainless steel screws and anchors. The Picture View screen wall was reinforced with support cables, after which Super Screen mesh and the two classic access doors were installed. The complete project timeline was 3 weeks.

Material Preparation & Pool Enclosure Installation
05
Final Inspection & Client Handover

After installation, our team checked the screen tension, access door operation, frame connections, fasteners, support cables, Super Gutter, and overall finish. The enclosure then proceeded through the required final inspection. Once approved, the completed project and related documentation were presented to the homeowners during the final walkthrough. Project #20329 was officially completed on April 16, 2025.

Final Inspection & Client Handover
06
Warranty & Ongoing Project Support

Following the final handover, the completed pool enclosure was placed under Screen Factory Florida’s warranty and ongoing support. The installed Super Screen mesh includes a 10-year warranty, while our team remains available to assist with questions related to the enclosure, access doors, hardware, or structural components. The homeowners can now enjoy a protected waterfront pool area with dependable support after installation.

Warranty & Ongoing Project Support

Want a Similar Result?

Get a free estimate for your project —
we’ll call you back within 15 minutes.

Design, Permits & Project Planning

Project #20329 required precise planning to create a 58 × 38 ft two-story pool enclosure while preserving the property’s panoramic waterfront view. Engineering drawings established the mansard roof geometry, 2 × 9 SMB beam layout, 7-inch Super Gutter connection, and structural support for the Picture View screen wall. The 3D visualization confirmed the proportions of the bronze aluminum frame, Super Screen sections, support cables, and classic access doors before installation. Together with the site plan, these documents supported Florida code compliance, accurate fabrication, and permit approval within 2 weeks.

Custom Pool Enclosure Engineering
Picture View Wall Design
3D Enclosure Visualization
Florida Code Compliance
Mansard Roof Engineering
01
Engineering Compliance

The engineering package defined the structural requirements for the custom 58 × 38 ft two-story pool enclosure, including the 2 × 9 SMB beam layout, 2 × 10 SMB carrier beams, mansard roof geometry, frame connections, support cables, and attachment to the existing roofline and gutter. Each component was planned around the existing home and specified to meet the applicable Florida Building Code requirements for the Riverview property. The drawings show plan and wall elevations with dimensions, the 6 × 6 posts, and a flood zone note. Each member is labeled by size, and the hatch marks the existing structure.

Riverview pool screen enclosure engineering plan 20329
02
3D Visual

The 3D model provided a clear preview of the pool enclosure before fabrication and installation began. It showed the proportions of the bronze two-story mansard frame, beam placement, Picture View screen wall, Super Screen sections, classic access doors, and connection to the existing home while confirming that the panoramic waterfront view would remain open. The model also showed the enclosure from a raised angle, which made the two-story height easier to judge before anything was built. Reviewing it together with the plans helped confirm the placement of each beam and post before construction began.

Riverview pool screen enclosure 3d visual 20329
03
Site Planning

The site plan positioned the new enclosure alongside the existing home while accounting for the home’s footprint, roofline, lot outline, backyard access, the pool deck, and structural connection points. It supported permit coordination, confirmed the 58 × 38 ft enclosure layout and clearances, and accurately located the structure and its distances to the property lines. The drawing also marks the street, Lake Lucaya Dr, and includes a compass for orientation. Seeing the structure against the lot lines before work started helped the team and the homeowners confirm that the layout fit the property.

Riverview pool screen enclosure site plan 20329
Built Right. Approved. Protected.

We engineer every enclosure to meet the strict 8th Edition Florida Building Code (2023), designed to meet applicable Florida Building Code structural and wind-load requirements.

Frequently Asked Questions

Answers to common questions about two-story pool screen enclosures in Riverview, including cost, roof design, permits, timelines, and maintenance.

How much does a two-story pool screen enclosure cost in Florida?

The cost depends on the size of the structure, the number of stories, the frame finish, the roof style, the screen type, the number of doors, and extras such as a Picture View wall. A two-story frame needs heavier beams and more bracing than a single-story one. For Project #20329 in Riverview, the reported cost was around $40,000 for a 58 × 38 ft two-story pool screen enclosure with a mansard roof, Super Screen, a Picture View wall, and two access doors. That figure describes this installation only. The most reliable way to price your own enclosure is an on-site visit, a measured scope, and a written estimate.

What is a mansard roof on a pool screen enclosure?

A mansard roof has sloped sides around a flatter center, which gives the structure more headroom than a simple sloped roof. On a pool screen enclosure, this adds usable height along the walls and a clean, balanced profile. On Project #20329, the mansard frame rises to about 21 ft overall over the center section and is covered with Super Screen like the walls. Compared with a basic roof, a mansard roof has more members and connections, so it needs its own engineering for each project. The members and connections depend on the span and the site, so the same shape can need different framing on another home. Ask your contractor to show the roof framing on the engineering plans before you choose a roof style.

Do you need a permit to build a pool screen enclosure in Florida?

In most cases, yes. A pool screen enclosure is a permanent structure, and Florida counties and cities generally review it before construction, including how it connects to the house and what it stands on. Requirements differ by location, and some areas add flood zone rules, so check with the local building department or ask your contractor to confirm them for your address. For Project #20329 in Riverview, permit review took 2 weeks. Another project may take more or less time, depending on the property, the complexity of the structure, and how complete the application is when it is submitted. A contractor who prepares the site plan and engineering plans can keep the schedule clear.

How long does it take to build a two-story pool screen enclosure?

The timeline has several parts: the permit stage, material preparation, and the installation of the frame, roof, and screen. On Project #20329 in Riverview, permit review took 2 weeks, and the work took 3 weeks. The project was completed on April 16, 2025. A larger or taller enclosure can take longer, and a two-story frame adds work compared with a single-story one. Before you sign a contract, ask for the expected permit window and the installation schedule in writing, and ask how weather could move the dates. Ordering materials and scheduling the crew also take time, so the permit stage and the work stage should be planned together.

How do you take care of a pool screen enclosure?

Rinse the screen panels and the frame with a garden hose from time to time to remove dust, pollen, and debris, and clear leaves from the roof screen so they do not hold water. Check the mesh for small tears and repair them early, because a small opening can grow. Open and close the access doors to confirm that the hinges and latches move smoothly, and inspect the frame connections and fasteners after major storms. Keep the gutter and downpipe clear so water does not collect against the frame or the house wall. For questions about this installation, contact Screen Factory Florida and reference Order #20329.

More projects

Explore more screen enclosure and pool cage projects in the Florida area.

Our Services

From custom pool enclosures and screened lanais to motorized screens and hurricane shutters, we create outdoor spaces made for the Florida lifestyle. Every solution combines lasting protection, everyday comfort, and clean design – so you can enjoy more fresh air, fewer insects, and peace of mind in any weather.

form-user-alt
Alex Martin
Senior Project Consultant, Screen Factory Florida
greetings-img Hi, I'm Alex, your project consultant. Fill in the details and I'll personally get back to you today.
Whether you need a free estimate or have questions about your project, just fill out the form - I'll personally get back to you today.
Name
Error
Phone
Error
Email
Error
Service Needed
Error
City
Error
Zip
Error
Address (Optional)
Error
Message (optional)
0/1000
Error
I have read and agree to the Privacy Policy and Terms of Service.