Pool Screen Cage with Hip Roof (Project #4322) – SE 36th St, Cape Coral, FL
This Cape Coral pool screen cage transformed a canal-side backyard into an outdoor living space. The project features a custom 43 × 35 ft L-shaped enclosure with a hip roof, 2 × 7 and 2 × 6 SMB beams, Super Screen, a 7-inch Super Gutter, and one access door. Designed for Florida living, the finished cage provides insect protection, natural airflow, and effective rainwater management.
Project Overview
In Cape Coral, a pool this close to the canal deserves a view that stays open. The homeowners wanted protection from insects and debris without losing the waterfront scenery. The result was a custom pool screen cage designed around the existing pool deck and a wide, open outlook.
The defining element is the hip roof. By rising evenly over the pool deck, it adds comfortable height and keeps the screen walls open to the canal view. The L-shaped, 43-by-35-foot footprint attaches to the rear of the home and gives the pool area a more open, balanced profile.
The bronze aluminum frame was built with 2-by-7 and 2-by-6 SMB beams and support cables. Stainless steel fasteners add corrosion resistance in Florida’s humid climate, while a 7-inch Super Gutter connects the cage to the existing roofline and manages runoff during heavy rain.
The enclosure uses premium Super Screen mesh backed by a 10-year warranty. This durable screening helps keep out insects and windblown debris while maintaining airflow, visibility, and a comfortable connection to the waterfront setting. One classic access door provides a simple route between the pool area and the backyard.
Homeowners considering a similar upgrade can explore our pool screen enclosures in Cape Coral.
Permitting was completed within 2 weeks, and the full project timeline was 3 weeks. Finished on April 8, 2026, the cage transformed the pool area into a cleaner, more comfortable outdoor living space without sacrificing the view that makes this Cape Coral property special.
Before & After


How We Did It
Project #4322 followed a complete design-build process, beginning with an on-site consultation and precise measurements of the Cape Coral pool area. After the materials and final 43 × 35 ft layout were approved, our team created the 3D visualization and engineering documentation for the hip-roof pool screen cage. The permit was approved within 2 weeks, followed by material preparation and installation. After the required final inspection and client walkthrough, the completed pool screen cage was placed under warranty and ongoing company support.
Our specialist visited the Cape Coral property to evaluate the existing pool deck, roofline, structural connection points, and canal surroundings. Precise measurements were taken for the custom 43 × 35 ft L-shaped pool screen cage. During this stage, the homeowners selected the bronze aluminum finish, premium Super Screen mesh, hip roof design, 7-inch Super Gutter, and classic access door. After the scope, materials, pricing, and timeline were confirmed, the contract was finalized.

Using the field measurements, our team developed a detailed 3D visualization showing how the new pool screen cage would connect to the home and preserve the waterfront view. The engineering documentation specified a hip roof with 2 × 7 and 2 × 6 SMB beams, support cables, stainless steel fasteners, and the required structural connections. This planning stage allowed the homeowners to review the finished appearance before construction began.

Once the design and engineering documentation were complete, the permit package was prepared and submitted for review. Our team coordinated the required plans and supporting documents for the Cape Coral pool screen cage, addressing the structural details of the hip-roof frame and the Super Gutter connection. The permit was approved within 2 weeks, allowing the project to move into material preparation and construction.

Materials were prepared according to the approved engineering plans before installation began at the property. Our installers connected the 7-inch Super Gutter to the existing roofline and assembled the bronze aluminum hip-roof frame using 2 × 7 and 2 × 6 SMB beams and stainless steel fasteners. The frame was reinforced with support cables, after which Super Screen mesh and the classic access door were installed. The complete project timeline was 3 weeks.

After installation, our team checked the screen tension, access door operation, frame connections, fasteners, support cables, Super Gutter, and overall finish. The cage then proceeded through the required final inspection. Once approved, the completed project and related documentation were presented to the homeowners during the final walkthrough. Project #4322 was officially completed on April 8, 2026.

Following the final handover, the completed pool screen cage was placed under Screen Factory Florida’s warranty and ongoing support. The installed Super Screen mesh includes a 10-year warranty, while our team remains available to assist with questions related to the enclosure, access door, hardware, or structural components. The homeowners can now enjoy a protected waterfront pool area with dependable support after installation.

Want a Similar Result?
Get a free estimate for your project —
we’ll call you back within 15 minutes.
Design, Permits & Project Planning
Project #4322 required precise planning to create a 43 × 35 ft L-shaped pool screen cage while preserving the property’s waterfront view. Engineering drawings established the hip roof geometry, 2 × 7 and 2 × 6 SMB beam layout, 7-inch Super Gutter connection, and structural support for the screen walls. The 3D visualization confirmed the proportions of the bronze aluminum frame, Super Screen sections, support cables, and classic access door before installation. Together with the site plan, these documents supported Florida code compliance, accurate fabrication, and permit approval within 2 weeks.
The engineering package defined the structural requirements for the custom 43 × 35 ft L-shaped pool screen cage, including the 2 × 7 and 2 × 6 SMB beam layout, hip roof geometry, frame connections, support cables, and attachment to the 7-inch Super Gutter at the house wall. Each component was planned around the existing home and specified to meet the applicable Florida Building Code requirements for the Cape Coral property. The drawings show plan and elevation views with dimensions, each member is labeled by size, a legend marks the cable bracing, and the 7-inch Super Gutter run along the house wall is dimensioned at about 29 ft.

The 3D model provided a clear preview of the pool screen cage before fabrication and installation began. It showed the proportions of the bronze hip-roof frame, beam placement, Super Screen sections, classic access door, and connection to the existing home while confirming that the canal view would remain open. The model also showed the cage from a raised angle, which made the L-shaped layout easier to judge before anything was built. Reviewing it with the plans helped confirm the placement of each beam before construction began. The same view also shows the 7-inch Super Gutter along the house wall.

The site plan positioned the new cage at the rear of the single-story residence while accounting for the home’s footprint, roofline, lot boundaries, backyard access, and structural connection points. It supported permit coordination, confirmed the 43 × 35 ft L-shaped layout, and accurately located the structure, its distances to the property lines, and its 12 ft height on the lot. The drawing also marks the street, SE 36th St, and includes a compass for orientation. Seeing the structure against the lot lines before work started helped the team and the homeowners confirm that the layout fit the property.

Frequently Asked Questions
Answers to common questions about pool screen cages with a hip roof in Cape Coral, including cost, permits, timelines, and maintenance.
How much does a pool screen cage cost in Florida?
The cost depends on the size of the structure, the footprint shape, the frame finish, the roof style, the screen type, the number of doors, and the work needed around the pool deck. For Project #4322 in Cape Coral, the reported cost was around $19,000 for a 43 × 35 ft L-shaped pool screen cage with a hip roof, Super Screen, a 7-inch Super Gutter, and one access door. That figure describes this installation only. The most reliable way to price your own cage is an on-site visit, a measured scope, and a written estimate that lists every feature included. Extras such as a taller roof or additional doors each add materials and labor to the scope.
What is a hip roof on a pool screen cage?
A hip roof slopes down on its outer sides instead of ending in a vertical gable wall. On a pool screen cage, this gives the structure a compact, house-like profile and adds headroom over the pool deck. On Project #4322, the cage stands about 12 ft high and the roof is covered with Super Screen like the walls. Compared with a flat roof, a hip roof has more members and connections, so it needs its own engineering for each project. The members and connections depend on the span and the site, so the same shape can need different framing on another home. Ask your contractor to show the roof framing on the engineering plans before you choose a roof style.
Do you need a permit to build a pool screen cage in Florida?
In most cases, yes. A pool screen cage is a permanent structure attached to the house, and Florida counties and cities generally review it before construction, including how it connects to the house and what it stands on. Requirements differ by location, so check with the local building department or ask your contractor to confirm them for your address. For Project #4322 in Cape Coral, permit review took 2 weeks. Another project may take more or less time, depending on the property, the complexity of the structure, and how complete the application is when it is submitted. A contractor who prepares the site plan and engineering plans can keep the schedule clear.
How long does it take to build a pool screen cage in Florida?
The timeline has several parts: the permit stage, material preparation, and the installation of the frame, roof, and screen. On Project #4322 in Cape Coral, permit review took 2 weeks, and the work took 3 weeks. The project was completed on April 8, 2026. A larger or more complex cage can take longer. Before you sign a contract, ask for the expected permit window and the installation schedule in writing, and ask how weather could move the dates. Ordering materials and scheduling the crew also take time, so the permit stage and the work stage should be planned together. An L-shaped footprint also adds corners to frame and screen compared with a simple rectangle.
How do you take care of a pool screen cage?
Rinse the screen panels and the frame with a garden hose from time to time to remove dust, pollen, and debris, and clear leaves from the roof screen so they do not hold water. Check the mesh for small tears and repair them early, because a small opening can grow. Open and close the access door to confirm that the hinges and latches move smoothly, and inspect the frame connections and fasteners after major storms. Keep the gutter and downpipe clear so water does not collect against the frame or the house wall. For questions about this installation, contact Screen Factory Florida and reference Order #4322.
More projects
Explore more screen enclosure and pool cage projects in the Florida area.
Our Services
From custom pool enclosures and screened lanais to motorized screens and hurricane shutters, we create outdoor spaces made for the Florida lifestyle. Every solution combines lasting protection, everyday comfort, and clean design – so you can enjoy more fresh air, fewer insects, and peace of mind in any weather.
Hi, I'm Alex, your project consultant. Fill in the details and I'll personally get back to you today.
















