Pool Screen Cage with Picture View and Lighting (Project #3313) – 28th Ave E, Bradenton, FL

Screen Pool Enclosure
map_check_alt Bradenton
calendar_alt December 26, 2025
size_alt Approx. 925 sq. ft. base area
Picture View Screen Wall
IRP Seating Area Roof
Super Screen Mesh
Integrated Lighting

This Bradenton pool screen cage covers a 925 sq. ft. base with a dark bronze aluminum frame, a Picture View front wall, and Super Screen with Florida Glass screen along the bottom. A 3-inch IRP roof covers the seating area, and 10 multicolored lights extend the evenings. The permit stage took 2 weeks, and the work took 3 weeks.

Project Value: Around $20,000
Bradenton pool screen cage after 3313
Bradenton pool screen cage exterior daytime corner view with sun 3313
Bradenton pool screen cage exterior front view from lawn 3313
Bradenton pool screen cage exterior rear corner view 3313
Bradenton pool screen cage exterior corner view at dusk 3313
Bradenton pool screen cage exterior side view along curb 3313
Bradenton pool screen cage exterior view along house wall 3313
Bradenton pool screen cage exterior wide view with house 3313
Bradenton pool screen cage interior pool and patio view 3313
Bradenton pool screen cage interior pool view through roof frame 3313
Bradenton pool screen cage interior view toward house 3313
Bradenton pool screen cage access door with florida glass panel 3313
Bradenton pool screen cage roof beam gusset plate detail 3313
Bradenton pool screen cage screen patio interior with solid roof 3313
Bradenton pool screen cage screen patio side view with downpipe 3313
Bradenton pool screen cage after 3313
Bradenton pool screen cage exterior daytime corner view with sun 3313
Bradenton pool screen cage exterior front view from lawn 3313
Bradenton pool screen cage exterior rear corner view 3313
Bradenton pool screen cage exterior corner view at dusk 3313
Bradenton pool screen cage exterior side view along curb 3313
Bradenton pool screen cage exterior view along house wall 3313
Bradenton pool screen cage exterior wide view with house 3313
Bradenton pool screen cage interior pool and patio view 3313
Bradenton pool screen cage interior pool view through roof frame 3313
Bradenton pool screen cage interior view toward house 3313
Bradenton pool screen cage access door with florida glass panel 3313
Bradenton pool screen cage roof beam gusset plate detail 3313
Bradenton pool screen cage screen patio interior with solid roof 3313
Bradenton pool screen cage screen patio side view with downpipe 3313
01
/
01

Project Overview

In Bradenton, a pool deck like this one deserves a view that stays open. The homeowners wanted protection from insects and debris without a grid of vertical posts cutting across the backyard scenery. The result was a custom pool screen cage with a screened seating area, designed around a wide, unobstructed outlook.

The defining element is the Picture View front wall. By reducing visual interruptions across the main elevation, it preserves the open view from the pool deck and the home. The IRP roof over the seating area adds comfortable cover and gives the 925 sq. ft. base area a more balanced profile.

The dark bronze aluminum frame was built with 2 × 6 and 2 × 8 SMB beams, K-braces, and support cables. Stainless steel fasteners add corrosion resistance in Florida’s humid climate, while a 7-inch Super Gutter with a 3 × 4 downpipe manages runoff during heavy rain.

The enclosure uses Super Screen mesh backed by a 10-year warranty, with a Florida Glass screen along the bottom of the walls. This durable screening helps keep out insects and windblown debris while maintaining airflow, visibility, and a comfortable connection to the backyard. One standard access door provides a simple route between the pool area and the yard, and ten multicolored lights extend the evenings.

Homeowners considering a similar upgrade can explore our pool screen enclosures in Bradenton.

Permitting took 2 weeks, and the full project timeline was 3 weeks. Finished on December 26, 2025, the enclosure transformed the pool area into a cleaner, more comfortable outdoor living space without sacrificing the view that makes this Bradenton property special.

Before & After

Before
After
Bradenton pool screen cage before 3313
Bradenton pool screen cage after 3313

Integrated Pool Cage Lighting

This enclosure was designed to remain comfortable and inviting after sunset. Ten multicolored fixtures were installed directly along the aluminum frame to distribute light across the pool deck without creating harsh glare or distracting from the structure, and a remote controller lets the family change the colors. Their placement highlights the clean lines of the dark bronze enclosure while improving visibility around the seating area and walking surfaces.

The wiring was routed neatly along the frame, helping the lighting feel like part of the original design rather than an add-on. It gives the homeowners a practical outdoor space for evening dinners, quiet conversations, or simply enjoying cooler Florida evenings.

You can learn more about fixture options, placement, color temperatures, and planning in our article: Pool Cage Lighting Ideas for Florida Homes.

Bradenton pool screen cage interior evening lighting over pool 3313

How We Did It

Project #3313 followed a complete design-build process, beginning with an on-site consultation and precise measurements of the Bradenton pool area. After the materials and final layout were approved, our team created the 3D visualization and engineering documentation for the pool screen cage and Picture View front wall. The permit was approved within 2 weeks, followed by material preparation and installation. After the required final inspection and client walkthrough, the completed 925 sq. ft. pool screen cage was placed under warranty and ongoing company support.

01
On-Site Consultation, Measurements & Contract

Our specialist visited the Bradenton property to evaluate the existing pool deck, roofline, structural connection points, and backyard surroundings. Precise measurements were taken for the custom pool screen cage and Picture View front wall. During this stage, the homeowners selected the dark bronze aluminum finish, Super Screen mesh with a Florida Glass screen at the bottom, the IRP roof over the seating area, 7-inch Super Gutter, standard access door, and lighting. After the scope, materials, pricing, and timeline were confirmed, the contract was finalized.

On-Site Consultation, Measurements & Contract
02
3D Visualization & Engineering Design

Using the field measurements, our team developed a detailed 3D visualization showing how the new pool enclosure would connect to the home and keep the view to the yard open. The engineering documentation specified 2 × 6 and 2 × 8 SMB beams, a Picture View front wall, K-braces, support cables, stainless steel fasteners, and the required structural connections. This planning stage allowed the homeowners to review the finished appearance before construction began.

3D Visualization & Engineering Design
03
Permit Application & Approval

Once the design and engineering documentation were complete, the permit package was prepared and submitted for review. Our team coordinated the required plans and supporting documents for the Bradenton pool enclosure, addressing the structural details of the frame, Super Gutter connection, and Picture View wall. The permit was approved within 2 weeks, allowing the project to move into material preparation and construction.

Permit Application & Approval
04
Material Preparation & Pool Enclosure Installation

Materials were prepared according to the approved engineering plans before installation began at the property. Our installers connected the 7-inch Super Gutter to the house and assembled the dark bronze aluminum frame using 2 × 6 and 2 × 8 SMB beams and stainless steel fasteners. The Picture View front wall was reinforced with K-braces and support cables, after which Super Screen mesh, the Florida Glass screen, the IRP roof panels, the standard access door, and the lighting were installed. The complete project timeline was 3 weeks.

Material Preparation & Pool Enclosure Installation
05
Final Inspection & Client Handover

After installation, our team checked the screen tension, access door operation, frame connections, fasteners, support cables, K-braces, Super Gutter, lighting, and overall finish. The enclosure then proceeded through the required final inspection. Once approved, the completed project and related documentation were presented to the homeowners during the final walkthrough. Project #3313 was officially completed on December 26, 2025.

Final Inspection & Client Handover
06
Warranty & Ongoing Project Support

Following the final handover, the completed pool screen cage was placed under Screen Factory Florida’s warranty and ongoing support. The installed Super Screen mesh includes a 10-year warranty, while our team remains available to assist with questions related to the enclosure, access door, hardware, lighting, or structural components. The homeowners can now enjoy a protected pool area with dependable support after installation.

Warranty & Ongoing Project Support

Want a Similar Result?

Get a free estimate for your project —
we’ll call you back within 15 minutes.

Design, Permits & Project Planning

Project #3313 required precise planning to create a pool screen cage with a 925 sq. ft. base area while preserving the property’s open backyard view. Engineering drawings established the frame geometry, 2 × 6 and 2 × 8 SMB beam layout, 7-inch Super Gutter connection, and structural support for the Picture View front wall. The 3D visualization confirmed the proportions of the dark bronze aluminum frame, Super Screen sections, K-braces, support cables, IRP roof, and standard access door before installation. Together with the site plan, these documents supported Florida code compliance, accurate fabrication, and permit approval within 2 weeks.

Pool Screen Cage Engineering
Picture View Wall Design
3D Enclosure Visualization
Florida Code Compliance
IRP Roof Engineering
01
Engineering Compliance

The engineering package defined the structural requirements for the custom pool screen cage, including the 2 × 6 and 2 × 8 SMB beam layout, Picture View front wall, frame connections, K-braces, support cables, and attachment to the 7-inch Super Gutter. Each component was planned around the existing house, the existing screen room, and the balcony above, and specified to meet the applicable Florida Building Code requirements for the Bradenton property. The drawings show plan, front, and side views with dimensions, each member is labeled by size, and a note shows that the Florida Glass screen sits under the chair rails.

Bradenton pool screen cage engineering plan 3313
02
3D Visual

The 3D model provided a clear preview of the pool enclosure before fabrication and installation began. It showed the proportions of the dark bronze frame, beam placement, Picture View front wall, Super Screen sections, standard access door, lighting positions, and connection to the existing home while confirming that the open backyard view would remain. The model also showed the cage from several angles, which made it easier to judge the layout around the pool before anything was built. A separate view shows the lighting layout with all ten fixtures. Reviewing it with the plans helped confirm the placement before construction began.

Bradenton pool screen cage 3d visual 3313
03
Site Planning

The site plan positioned the new enclosure beside the existing home while accounting for the home’s footprint, the lot boundaries, backyard access, and structural connection points. It supported permit coordination, confirmed the 925 sq. ft. enclosure layout, and accurately located the proposed structure, its distances to the property lines, and the street, 28th Ave. The drawing also includes a compass for orientation and outlines the structure next to the house. Seeing it against the lot lines before work started helped the team and the homeowners confirm that the layout fit the property.

Bradenton pool screen cage site plan 3313
Built Right. Approved. Protected.

We engineer every enclosure to meet the strict 8th Edition Florida Building Code (2023), designed to meet applicable Florida Building Code structural and wind-load requirements.

Frequently Asked Questions

Answers to common questions about pool screen cages with a Picture View wall in Bradenton, including cost, permits, timelines, and lighting.

How much does a pool screen cage with a Picture View wall cost in Florida?

The cost depends on the size of the structure, the frame finish, the roof type, the screen type, the number of doors, and extras such as a Picture View wall or lighting. For Project #3313 in Bradenton, the reported cost was around $20,000 for a pool screen cage with a Picture View front wall, an IRP roof over the seating area, Super Screen mesh, and ten lights. That figure describes this installation only. The most reliable way to price your own enclosure is an on-site visit, a measured scope, and a written estimate that lists every feature included. A Picture View wall, lighting, and work on an existing screen room each add materials and labor to the scope.

What is a Picture View wall on a pool screen cage?

A Picture View wall uses a larger, more open screen panel, so fewer bars cross your line of sight to the pool and the yard. On Project #3313, the Picture View is on the front wall of the cage, while the rest of the structure uses Super Screen with a Florida Glass screen along the bottom. Because the wall is more open, its framing and bracing are shown on the engineering plans for each project and can differ from one home to another. Ask your contractor to show the wall framing on the plans before you choose it. It is a good fit when the pool and the yard are the main view from the patio, and it keeps the same insect protection as a standard screen wall.

Do you need a permit to build a pool screen cage in Florida?

In most cases, yes. A pool screen cage is a permanent structure, and Florida counties and cities generally review it before construction, including how it connects to the house and what it stands on. Requirements differ by location, so check with the local building department or ask your contractor to confirm them for your address. For Project #3313 in Bradenton, permit review took 2 weeks. Another project may take more or less time, depending on the property, the complexity of the structure, and how complete the application is when it is submitted. A contractor who prepares the site plan and engineering plans can keep the schedule clear.

How long does it take to build a pool screen cage in Florida?

The timeline has several parts: the permit stage, material preparation, and the installation of the frame, roof, screen, and any extras. On Project #3313 in Bradenton, permit review took 2 weeks, and the work took 3 weeks. The project was completed on December 26, 2025. A larger enclosure, a Picture View wall, or extra work such as lighting or upgrades to an existing screen room can add time. Before you sign a contract, ask for the expected permit window and the installation schedule in writing, and ask how weather could move the dates. Ordering materials and scheduling the crew also take time, so the permit stage and the work stage should be planned together.

How do you take care of a pool screen cage with lighting?

Rinse the screen panels and the frame with a garden hose from time to time to remove dust, pollen, and debris, and clear leaves from the roof so they do not hold water. Check the mesh for small tears and repair them early, because a small opening can grow. Open and close the access door to confirm that the hinges and latches move smoothly, and inspect the frame connections, fasteners, and light fixtures after major storms. Keep the gutter and downpipe clear so water does not collect against the frame or the house wall. For questions about this installation, contact Screen Factory Florida and reference Order #3313.

More projects

Explore more screen enclosure and pool cage projects in the Florida area.

Our Services

From custom pool enclosures and screened lanais to motorized screens and hurricane shutters, we create outdoor spaces made for the Florida lifestyle. Every solution combines lasting protection, everyday comfort, and clean design – so you can enjoy more fresh air, fewer insects, and peace of mind in any weather.

form-user-alt
Alex Martin
Senior Project Consultant, Screen Factory Florida
greetings-img Hi, I'm Alex, your project consultant. Fill in the details and I'll personally get back to you today.
Whether you need a free estimate or have questions about your project, just fill out the form - I'll personally get back to you today.
Name
Error
Phone
Error
Email
Error
Service Needed
Error
City
Error
Zip
Error
Address (Optional)
Error
Message (optional)
0/1000
Error
I have read and agree to the Privacy Policy and Terms of Service.