Picture View Pool Screen Cage (Project #20620) – Grand National Dr, Myakka City, FL
This Myakka City pool screen cage covers an 87 × 46 ft pool deck with a bronze aluminum frame, a mansard roof, and Super Screen mesh. The Picture View front wall stands 12 ft high across its three center panels, and a 7-inch Super Gutter connects the roof to the house. The permit stage took 3 weeks, and the build took 4 weeks.
Project Overview
On Grand National Drive in Myakka City, the homeowners wanted to use their pool deck without insects and windblown debris. Project #20620 added a new pool screen cage that is 87 ft wide and 46 ft deep, with a total structure area of about 6,286 sq. ft. The frame is bronze aluminum, and the structure stands about 10 ft high at the house soffit.
The front wall is designed as a Picture View elevation. It is divided into 6, 17, 41, 17, and 6 ft sections, so the wide center panels interrupt the view with only a few posts. The 17, 41, and 17 ft panels are 12 ft high, and the two 6 ft end sections are 10 ft high.
A mansard roof with 2 × 7, 2 × 8, and 2 × 10 SMB beams covers the cage, and cable bracing stiffens the front wall and the sides. A 7-inch Super Gutter connects the roof to the house and carries rain away through downpipes. Stainless steel screws and anchors resist corrosion in Florida’s humid climate, and the posts, beams, and bracing share one bronze finish.
Super Screen mesh covers the walls and roof, keeping out insects and windblown debris while keeping airflow and daylight in the space. Two additional exterior screen panels, about 10 ft and 18 ft wide, continue the screening along the house wall. Every property needs its own measurements and estimate, so the figures here describe this installation only.
Homeowners considering a similar upgrade can explore our screen enclosures in the Sarasota area.
The permit stage took 3 weeks, and installation took 4 weeks. Finished on July 28, 2026, Project #20620 was reported at a cost of around $40,000. The enclosure turned the pool deck into a cleaner, more comfortable outdoor living space, protected from insects and open to airflow and daylight.
Before & After


How We Did It
Project #20620 followed the complete design-build sequence for a pool screen cage in Myakka City. After an on-site consultation and measurements, the team confirmed an 87 × 46 ft layout with a mansard roof, a Picture View front wall, and Super Screen mesh. The 3D visualization, site plan, and engineering plans came next. Permitting took 3 weeks, followed by material preparation and a 4-week installation. The work was completed on July 28, 2026, and the finished cage moved into warranty and ongoing company support. The six stages below describe how the planning, materials, and construction came together for this screened pool deck.
Our specialist visited the Myakka City property to evaluate the pool deck, the rear wall of the house, the roofline, and the surrounding yard. Measurements were taken for the 87 × 46 ft cage and its Picture View front wall. During this stage, the homeowners selected the bronze aluminum finish, the mansard roof design, Super Screen mesh, and the 7-inch Super Gutter connection. After the scope, materials, pricing, and timeline were confirmed, the contract was finalized. This visit set the foundation for every later stage, from design to permit and installation.

Using the field measurements, the team prepared a 3D visualization, a site plan, and engineering plans for the cage. The plans show the 87 × 46 ft overall size, the mansard roof, the 2 × 7, 2 × 8, and 2 × 10 SMB beams, the cable bracing, the 7-inch Super Gutter, and the Picture View front wall. This planning stage let the homeowners review the proportions before construction began, and it fixed how each frame member connects to the house. The same documents were used to prepare the permit application.

Once the design and engineering documentation were complete, the permit package was prepared and submitted for review. The team coordinated the site plan and engineering plans for the Myakka City pool screen cage, including the frame connection details. The permit stage took 3 weeks, after which the project moved into material preparation and installation. Review periods differ by property, so another project may need a different timeline.

Materials were prepared according to the engineering plans before installation began at the property. The installers assembled the bronze aluminum frame, set the mansard roof structure, and fastened the posts with stainless steel anchors. The 7-inch Super Gutter was connected to the house, cable bracing was installed, and Super Screen mesh was fitted to the walls and roof. The access doors were installed with their hardware. The complete installation took 4 weeks. Each step followed the engineering drawings.

After installation, the team checked the screen fit, access door operation, frame connections, anchor points, cable bracing, Super Gutter, and overall finish. The completed cage covers an 87 × 46 ft pool deck under a mansard roof, with Super Screen mesh across the walls and roof. The homeowners could then see how the bronze frame and screen defined the pool area. Project #20620 was completed on July 28, 2026. The enclosure was then ready for everyday use by the family.

Following the final handover, the completed pool screen cage was placed under Screen Factory Florida’s warranty and ongoing support. The installed Super Screen typically carries a manufacturer’s material warranty of about 10 years, while our team remains available to assist with questions related to the screen panels, the access doors, the hardware, or other installed components. The homeowners can now enjoy a protected, screened pool deck with dependable support after installation.

Want a Similar Result?
Get a free estimate for your project —
we’ll call you back within 15 minutes.
Design, Permits & Project Planning
Project #20620 brought a bronze pool screen cage to a home on Grand National Drive in Myakka City. The structure measures 87 ft by 46 ft, has a mansard roof, and includes a Picture View front wall built from 6, 17, 41, 17, and 6 ft sections. Planning covered the 2 × 7, 2 × 8, and 2 × 10 SMB beams, the cable bracing, Super Screen mesh, and the 7-inch Super Gutter connection to the house. Stainless steel screws and anchors were used throughout. The 3D visualization and site plan confirmed the proportions and placement before construction. The permit stage took 3 weeks, and installation took 4 weeks, so the project was completed on July 28, 2026.
The engineering package defined the structural requirements for the 87 × 46 ft pool screen cage, including the mansard roof geometry, the 2 × 7, 2 × 8, and 2 × 10 SMB beam layout, cable bracing, and attachment to the house through a 7-inch Super Gutter. It also shows the Picture View front wall, with its 6, 17, 41, 17, and 6 ft sections. Each member is labeled by size on the plans, and the legend marks the cable bracing, so the layout could be checked against the structure during installation. The package was prepared for permit review, which took 3 weeks. The drawings show plan, front, and side views with dimensions.

The 3D model provided a clear preview of the pool screen cage before fabrication and installation began. It showed the mansard roof, the bronze frame, the overall layout, the cable bracing, and how the structure connects to the house. Reviewing these views together with the plans helped confirm the proportions and placement before construction began. The model also shows the cage over the pool from several angles, including the roofline, the way the frame meets the house wall, and the door positions, which made it easier to judge the layout before anything was built. The views make the long front wall easy to read.

The site plan placed the new pool screen cage on the lot behind the single-family residence. It shows the 87 ft wide structure, its distances to the property lines, about 82.8 ft to the nearest side line on one side and about 276.65 ft on the other, and the lot outline, which covers about 5 acres, with a north arrow, so the position of the structure could be checked against the boundaries. It supported permit coordination and confirmed where the cage sits on the lot before installation began. The drawing also marks the house outline next to the structure. These distances let the team verify the layout before installation began.

Frequently Asked Questions
Answers to common questions about pool screen cages in Myakka City, including cost, permits, Picture View walls, timelines, and maintenance.
How much does a pool screen cage cost in Florida?
The cost depends on the size of the structure, the frame finish, the roof style, the screen type, the number of doors, and the height of the walls. A larger cage needs more aluminum, more screen, and more installation time, so the price rises with the area covered. For Project #20620 in Myakka City, the reported cost was around $40,000 for an 87 × 46 ft pool screen cage with a mansard roof, Super Screen mesh, a 7-inch Super Gutter, and a Picture View front wall. That figure describes this installation only. The most reliable way to price your own cage is an on-site visit, a measured scope, and a written estimate that lists every feature included.
Do you need a permit to build a pool screen cage in Florida?
In most cases, yes. A pool screen cage is a structure, and Florida counties and cities generally review it before construction. Requirements differ by location, so check with the local building department or ask your contractor to confirm them for your address. For Project #20620 in Myakka City, the permit stage took 3 weeks before installation began. Another project may take more or less time, depending on the property, the complexity of the structure, and how complete the application is when it is submitted. A contractor who prepares the site plan and engineering plans can keep the schedule clear and make the review easier to follow.
What is a Picture View wall on a pool screen cage?
A Picture View wall uses fewer, wider screen panels, so fewer posts cut across the view. On Project #20620, the front wall is divided into 6, 17, 41, 17, and 6 ft sections, with the 17, 41, and 17 ft panels at 12 ft high and the two end sections at 10 ft. Wider openings call for heavier posts and cable bracing, and the engineering plans mark both. The trade-off is a stronger frame in exchange for a cleaner view of the yard. Ask your contractor which opening widths suit your cage and how they will be braced, since every structure is engineered for its own dimensions. That is why the Picture View wall is shown on the engineering plans together with the frame.
How long does it take to build a pool screen cage?
The timeline has several parts: the permit stage, material preparation, and the installation of the frame and screen. On Project #20620 in Myakka City, permitting took 3 weeks and the installation took 4 weeks, with the work completed on July 28, 2026. A large cage with a long front wall needs more time than a small one. Before you sign a contract, ask for the expected permit window and the installation schedule in writing, and ask how weather could move the dates. Review periods and installation schedules differ by property, so another project may take more or less time. Material preparation happens before the crew arrives, so the work on site can run without waiting for parts.
How do you take care of a pool screen cage?
Rinse the screen panels and the frame with a garden hose from time to time to remove dust, pollen, and debris. Check the mesh for small tears and repair them early, because a small opening can grow. Open and close the access doors to confirm that the hinges and latches move smoothly, and inspect the frame connections and fasteners after major storms. Trim shrubs and tree branches back from the frame so they do not rub against the screen. Keep the gutter and downspouts clear so water does not collect against the frame. For questions about this installation, contact Screen Factory Florida and reference Order #20620.
More projects
Explore more screen enclosure and pool cage projects in the Florida area.
Our Services
From custom pool enclosures and screened lanais to motorized screens and hurricane shutters, we create outdoor spaces made for the Florida lifestyle. Every solution combines lasting protection, everyday comfort, and clean design – so you can enjoy more fresh air, fewer insects, and peace of mind in any weather.
Hi, I'm Alex, your project consultant. Fill in the details and I'll personally get back to you today.














