Pool Screen Cage with Mansard Roof (Project #3258) – 39th Ave, Vero Beach, FL
This Vero Beach pool screen cage covers a 39 × 27 ft pool area with a white aluminum frame, a mansard roof, and Regular Screen 18/14 mesh. It uses 2 × 7 and 2 × 4 SMB beams, cable bracing, and a 7-inch Super Gutter with downpipes, and it is anchored to the existing pool deck. The project was completed on March 2, 2026.
Project Overview
At a home on 39th Ave in Vero Beach, the homeowners wanted to use their pool without insects and debris. Project #3258 added a new pool screen cage that is 39 ft wide and 27 ft deep, with a footprint of about 1,053 sq. ft. The frame is white aluminum, with 8 ft walls and an overall height of about 11 ft under the roof.
A mansard roof covers the cage. The 2 × 7 SMB beams carry the roof, 2 × 4 SMB beams frame the walls and the roof edge, and cable bracing stiffens the structure. Gusset plates tie the beams together at the roof corners, and a 7-inch Super Gutter with downpipes carries rain away at the house wall.
Regular Screen 18/14 mesh covers the walls and roof, keeping out insects while keeping airflow and daylight in the pool area. Stainless steel screws and anchors resist corrosion in Florida’s humid climate, and the posts, beams, and bracing share one white finish. The access doors are fitted with white hardware.
The cage is anchored to the existing pool deck, so no new concrete work was needed. Every property needs its own measurements and estimate, so the figures here describe this installation only.
Homeowners considering a similar upgrade can explore our pool screen enclosures across Florida.
Permitting for a project like this typically takes about 2 weeks, and installation about 2 to 4 weeks, depending on the property and the schedule. Project #3258 was completed on March 2, 2026, and was reported at a cost of around $18,000. The cage turned the pool area into a cleaner, more comfortable outdoor living space, protected from insects and open to airflow and daylight.
Before & After


How We Did It
Project #3258 followed the complete design-build sequence for a pool screen cage in Vero Beach. After an on-site consultation and measurements, the team confirmed a 39 × 27 ft layout with a mansard roof. The 3D visualization, site plan, and engineering plans came next, followed by the permit, material preparation, and installation. For a project of this size, permitting typically takes about 2 weeks and installation about 2 to 4 weeks. The work was completed on March 2, 2026, and the finished cage moved into warranty and ongoing company support. The six stages below describe how the planning, materials, and construction came together.
Our specialist visited the Vero Beach property to evaluate the pool, the pool deck, the rear wall of the house, the roofline, and the yard. Measurements were taken for the 39 × 27 ft cage. During this stage, the homeowners selected the white aluminum finish, the mansard roof design, Regular Screen mesh, and the 7-inch Super Gutter connection. After the scope, materials, pricing, and timeline were confirmed, the contract was finalized. This visit set the foundation for every later stage, from design to permit and installation.

Using the field measurements, the team prepared a 3D visualization, a site plan, and engineering plans for the cage. The plans show the 39 × 27 ft layout, the mansard roof, the 2 × 7 and 2 × 4 SMB beams, the cable bracing, the 7-inch Super Gutter, and the connection of the posts to the existing pool deck. This planning stage let the homeowners review the proportions before construction began, and it fixed how each frame member connects to the house. The same documents were used to prepare the permit application.

Once the design and engineering documentation were complete, the permit package was prepared and submitted for review. The team coordinated the site plan and engineering plans for the Vero Beach pool screen cage, including the gutter connection and the deck details. In our projects, permit review typically takes about 2 weeks. Review periods differ by property, so another project may need a different timeline.

Materials were prepared according to the engineering plans before installation began at the property. The installers assembled the white aluminum frame, set the mansard roof structure with its 2 × 7 SMB beams, and anchored the posts to the existing pool deck. The 7-inch Super Gutter was connected to the house, cable bracing was installed, and Regular Screen mesh was fitted to the walls and roof. The access doors were installed with their hardware. Installation of a cage this size typically takes about 2 to 4 weeks, and each step followed the engineering drawings.

After installation, the team checked the screen fit, access door operation, frame connections, anchor points, cable bracing, Super Gutter, and overall finish. The completed cage covers a 39 × 27 ft pool area under a mansard roof, with Regular Screen mesh across the walls and roof. The homeowners could then see how the white frame and screen defined the pool area. Project #3258 was completed on March 2, 2026. The enclosure was then ready for everyday use by the family.

Following the final handover, the completed pool screen cage was placed under Screen Factory Florida’s warranty and ongoing support. The installed Regular Screen typically carries a manufacturer’s material warranty of about 5 years, while our team remains available to assist with questions related to the screen panels, the access doors, the hardware, or other installed components. The homeowners can now enjoy a protected, screened pool area with dependable support after installation.

Want a Similar Result?
Get a free estimate for your project —
we’ll call you back within 15 minutes.
Design, Permits & Project Planning
Project #3258 brought a white pool screen cage with a mansard roof to a home on 39th Ave in Vero Beach. The structure measures 39 ft by 27 ft, with 8 ft walls and an overall height of about 11 ft. Planning covered the 2 × 7 and 2 × 4 SMB beams, the cable bracing, Regular Screen mesh, the 7-inch Super Gutter connection to the house, and the connection of the posts to the existing pool deck. The 3D visualization and site plan confirmed the proportions and placement before construction. For a project of this size, permitting typically takes about 2 weeks and installation about 2 to 4 weeks, and the work was completed on March 2, 2026.
The engineering package defined the structural requirements for the 39 × 27 ft pool screen cage, including the mansard roof geometry, the 2 × 7 and 2 × 4 SMB beam layout, cable bracing, and attachment to the house through a 7-inch Super Gutter. It also detailed the connection of the posts to the existing pool deck. Each member is labeled by size on the plans, and the lettered callouts point to the connection details. The roof plan notes a 12 inch overhang with the 7-inch Super Gutter. The package was prepared for permit review, which typically takes about 2 weeks. The drawings show plan, front, and side views with dimensions.

The 3D model provided a clear preview of the pool screen cage before fabrication and installation began. It showed the white frame, the mansard roof, the access doors, the downpipe, and how the structure connects to the house wall. Reviewing these views together with the plans helped confirm the proportions and placement before construction began. The model also shows the cage over the pool from several angles, including the roofline, the way the frame meets the house wall, and the door positions, which made it easier to judge the layout before anything was built. The views show the 39 ft front clearly.

The site plan placed the new pool screen cage at the rear of the single-family residence on its lot. It shows the 39 ft by 27 ft structure, its distances to the property lines, with about 10 ft to the side lines on both sides and about 22 ft to the rear line, and the lot outline, which measures 125 ft by 60 ft, so the position of the structure could be checked against the boundaries. It supported permit coordination and confirmed where the cage sits on the lot before installation. These dimensions let the team verify the layout before the frame was assembled. The drawing also marks the house outline next to the structure and the street, 39th Ave.

Frequently Asked Questions
Answers to common questions about pool screen cages in Vero Beach, including cost, permits, mansard roofs, timelines, and maintenance.
How much does a pool screen cage with a mansard roof cost in Florida?
The cost depends on the size of the structure, the frame finish, the roof style, the screen type, the number of doors, and whether the foundation needs work. A cage that stands on an existing pool deck, as in this project, needs no new concrete, while a cage that needs a footing adds excavation, steel, and concrete to the scope. For Project #3258 in Vero Beach, the reported cost was around $18,000 for a 39 × 27 ft pool screen cage with a white aluminum frame, a mansard roof, Regular Screen mesh, and a 7-inch Super Gutter. That figure describes this installation only. The most reliable way to price your own cage is an on-site visit, a measured scope, and a written estimate that lists every feature included.
Do you need a permit to build a pool screen cage in Florida?
In most cases, yes. A pool screen cage is a structure, and Florida counties and cities generally review it before construction, including how it is attached to the house and the pool deck. Requirements differ by location, so check with the local building department or ask your contractor to confirm them for your address. In our projects, permit review typically takes about 2 weeks, but another project may take more or less time, depending on the property, the complexity of the structure, and how complete the application is when it is submitted. A contractor who prepares the site plan and engineering plans can keep the schedule clear.
What is a mansard roof on a pool screen cage?
A mansard roof has steeper sloped sections around the edges and a flatter section in the middle. On a pool screen cage, this shape adds height at the walls, so the space feels open and tall, while the roof beams, such as the 2 × 7 SMB beams on Project #3258, carry the span. Compared with a simple single-slope roof, a mansard roof has more beams and connections, so it needs its own engineering for each project. The mansard roof on this cage is covered with screen, which keeps the pool area open to daylight and airflow. Ask your contractor to show the roof framing on the engineering plans before you choose a roof style.
How long does it take to build a pool screen cage?
The timeline has several parts: the permit stage, material preparation, and the installation of the frame, roof, and screen. In our projects, permitting typically takes about 2 weeks, and installation of a pool cage typically takes about 2 to 4 weeks, depending on the size and the schedule. Project #3258 in Vero Beach was completed on March 2, 2026. Work around an existing pool can be carried out in phases, so the calendar time from the first visit to completion may be longer than the installation itself. Before you sign a contract, ask for the expected permit window and the installation schedule in writing, and ask how weather could move the dates.
How do you take care of a pool screen cage?
Rinse the screen panels and the frame with a garden hose from time to time to remove dust, pollen, and debris, and clear leaves from the roof screen so they do not fall into the pool. Check the mesh for small tears and repair them early, because a small opening can grow. Open and close the access doors to confirm that the hinges and latches move smoothly, and inspect the frame connections, gusset plates, and fasteners after major storms. Keep the gutter and downpipes clear so water does not collect against the frame or the house wall. For questions about this installation, contact Screen Factory Florida and reference Order #3258.
More projects
Explore more screen enclosure and pool cage projects in the Florida area.
Our Services
From custom pool enclosures and screened lanais to motorized screens and hurricane shutters, we create outdoor spaces made for the Florida lifestyle. Every solution combines lasting protection, everyday comfort, and clean design – so you can enjoy more fresh air, fewer insects, and peace of mind in any weather.
Hi, I'm Alex, your project consultant. Fill in the details and I'll personally get back to you today.














