Pool Screen Enclosure (Project #20613) – Serrano Cir, Naples, FL
Naples
March 26, 2026
Approx. 200 sq. ft. footprint; 17 ft wide; 13 ft height
This Naples pool screen enclosure covers about 200 sq. ft. beside the house, with a bronze aluminum frame, SMB beams, and cable bracing under a mansard roof. The structure reaches 13 ft, and a 5-inch Super Gutter connects it to the existing roofline. No-See-Um mesh protects the pool from insects and debris while keeping the lake view open. The permit stage took 2 weeks, and the build took 2 weeks.
Project Overview
At the Serrano Cir home in Naples, the homeowners wanted to enjoy their pool without insects and debris in the water. Project #20613 added a new bronze aluminum pool screen enclosure with a mansard roof, a footprint of about 200 sq. ft., and a height of 13 ft. The structure is 17 ft wide and attaches to the corner of the house.
The pool sits on a lakefront lot, and the screen keeps that view open. The layout is compact, with an angled corner in the plan, so the enclosure follows the existing pool deck and patio instead of taking over the yard.
The frame is bronze aluminum, so the posts, beams, and bracing share one consistent finish. SMB beams support the roof, and cable bracing stiffens the frame. A 5-inch Super Gutter connects the enclosure to the existing roofline and manages rain runoff where the structure meets the house.
No-See-Um screen mesh covers the walls and roof. Its fine weave keeps out very small insects and windblown debris while keeping airflow and daylight in the pool area, and an access door connects the screened space with the yard. The project photos record the main stages of the build: the frame, the roof, the screen installation, and the finished enclosure. Every property needs its own measurements and estimate, so the figures here describe this installation only.
Homeowners considering a similar upgrade can explore our screen enclosures in Naples.
The permit stage took 2 weeks, and installation took 2 weeks. Finished on March 26, 2026, Project #20613 was reported at a cost of around $8,000. The enclosure turned the pool area into a cleaner, more comfortable outdoor living space, protected from insects and debris and open to airflow and daylight.
Before & After
How We Did It
Project #20613 followed the complete design-build sequence for a pool screen enclosure in Naples. After an on-site consultation and measurements, the team confirmed a bronze aluminum frame, a compact layout 17 ft wide, a mansard roof, and a height of 13 ft. The 3D visualization, site plan, and engineering plans came next. Permitting took 2 weeks, followed by material preparation and a 2-week installation. The work was completed on March 26, 2026, and the finished enclosure moved into warranty and ongoing company support. The six stages below describe how the planning, materials, and construction came together for this screened pool area.
Our specialist visited the Naples property to evaluate the existing pool deck, the roofline, the corner of the house, and the yard facing the lake. Measurements were taken for the new enclosure, about 200 sq. ft. in footprint and 13 ft high. During this stage, the homeowners selected the bronze aluminum finish, No-See-Um screen mesh, and the 5-inch Super Gutter connection. After the scope, materials, pricing, and timeline were confirmed, the contract was finalized. This visit set the foundation for every later stage, from design to permit and installation.
Using the field measurements, the team prepared a 3D visualization of the enclosure, a site plan, and engineering plans. The drawings show the compact footprint with its angled corner, the mansard roof, the 13 ft height, the SMB beam layout, the cable bracing, and the 5-inch Super Gutter connection to the house. This planning stage let the homeowners review the proportions before construction began, and it fixed how each frame member fits together. The same documents were used to prepare the permit application.
Once the design and engineering documentation were complete, the permit package was prepared and submitted for review. The team coordinated the site plan and engineering plans for the Naples pool enclosure, covering the frame, the Super Gutter connection, and the cable bracing. The permit stage took 2 weeks, after which the project moved into material preparation and installation. Review periods differ by property, so another project may need a different timeline.
Materials were prepared according to the engineering plans before installation began at the property. The installers assembled the bronze aluminum frame, set the SMB beams, and installed the cable bracing. The 5-inch Super Gutter was connected to the existing roofline, and No-See-Um screen mesh was fitted to the walls and roof. The complete installation took 2 weeks. Working in this order keeps the frame, the roof, and the screen aligned, and each step followed the engineering drawings.
After installation, the team checked the screen fit, frame connections, cable bracing, Super Gutter, and overall finish. The completed enclosure covers about 200 sq. ft. at a height of 13 ft, with No-See-Um screen mesh across the walls and roof. The homeowners could then see how the bronze frame and screen defined the pool area and kept the lake view open. Project #20613 was completed on March 26, 2026. The enclosure was then ready for everyday use by the family.
Following the final handover, the completed pool enclosure was placed under Screen Factory Florida’s warranty and ongoing support. Our team remains available to assist with questions related to the screen panels, the access door, hardware, or other installed components. The homeowners can now enjoy a protected, screened pool area with dependable support after installation. Questions about care or maintenance can be directed to the same team that built the structure.
Want a Similar Result?
Get a free estimate for your project —
we’ll call you back within 15 minutes.
Design, Permits & Project Planning
Project #20613 brought a bronze pool screen enclosure to a home on Serrano Cir in Naples. The structure covers about 200 sq. ft., with a width of 17 ft and a height of 13 ft. Planning covered the aluminum frame, the mansard roof geometry, the SMB beam layout, cable bracing, and the 5-inch Super Gutter connection to the house. The 3D visualization and site plan confirmed the proportions and placement before installation. The permit stage took 2 weeks, and installation took 2 weeks, so the project was completed on March 26, 2026. Together, these decisions defined the scope, the materials, and the schedule. The 13 ft height guided the panel layout.
The engineering package defined the structural requirements for the new pool enclosure, including the mansard roof geometry, the SMB beam layout, frame connections, cable bracing, and attachment to the existing roofline through a 5-inch Super Gutter. The drawings show plan, front, and side views with dimensions and member sizes, so the fabrication and installation crews worked from one set of documents. The package was prepared for permit review, which took 2 weeks. Each member is labeled by size on the plans, and the legend marks the cable bracing, so the layout could be checked against the structure during installation.
The 3D model provided a clear preview of the pool enclosure before fabrication and installation began. It showed the compact footprint with its angled corner, the bronze frame, the mansard roof, the 13 ft height, the cable bracing, and how the structure connects to the existing home next to the pool. Reviewing these views together with the plans helped confirm the proportions and placement before construction began. The model also shows the frame from several angles, including the roofline and the way the structure meets the house wall, which made it easier to judge the layout and the view before anything was built.
The site plan placed the new enclosure on the lot beside the existing single-family residence. It shows the footprint with its angled corner, the clearances to the nearest property lines, and the lot outline along Serrano Cir with a north arrow, so the position of the structure could be checked against the boundaries. The closest clearance is about 5 ft. The plan supported permit coordination and confirmed exactly where the structure sits on the lot before materials were ordered and installation began. These dimensions let the team verify the layout against the property boundaries before installation.
Frequently Asked Questions
Answers to common questions about small pool screen enclosures in Naples, including cost, permits, gutters, cable bracing, and maintenance.
How much does a small pool screen enclosure cost in Naples, FL?
A small enclosure still depends on the same factors as a large one: the footprint, the height, the frame finish, the screen type, the gutter connection to the house, the number of doors, and the extras. A compact layout keeps material and labor lower, but a structure that attaches to the house needs careful flashing and gutter work, which adds time. For Project #20613 in Naples, the reported cost was around $8,000 for a bronze aluminum enclosure with a mansard roof and No-See-Um screen, about 200 sq. ft. and 13 ft in height. That figure describes this installation only. To price your own pool, ask for an on-site visit and a written estimate that lists every material and feature.
How long does it take to get a permit for a pool cage in Naples?
Review times depend on the building department, the complexity of the structure, and how complete the application is when it is submitted. The package normally includes a site plan and engineering plans, and requirements differ by location, so check with the local building department or ask your contractor to confirm them for your address. For Project #20613 in Naples, the permit stage took 2 weeks and the installation took another 2 weeks, with the work completed on March 26, 2026. Another project may take more or less time, so ask for the expected permit window and the installation schedule in writing before you sign a contract.
Can a pool screen enclosure be connected to the house gutter?
Yes. A Super Gutter is an integrated aluminum drainage system used on screen enclosures and pool cages. It collects rain from the enclosure roof and directs it into downspouts, which helps keep water from spilling into the pool area. A 5-inch gutter is the standard choice for most residential projects, while a 7-inch gutter is used for larger roof spans and heavy rainfall. Project #20613 uses a 5-inch Super Gutter where the enclosure meets the existing roofline. The right size depends on the roof span and the length of the gutter run, so ask your contractor to confirm it for your layout and downspout locations.
What does cable bracing do on a pool screen enclosure?
Cable bracing consists of diagonal cables that connect frame members across a wall or bay. On engineering drawings it is marked in the legend as cable bracing, and the plans show where each cable runs. Project #20613 includes cable bracing in its plan set, and the cables are visible on the 3D visualization. The exact layout is specified by the engineer for each structure, so it differs from one project to another. If you are comparing proposals, ask where the bracing is located and whether it appears in the drawings. Cable bracing works together with the beams and posts, so it should be reviewed as part of the whole frame rather than as a separate add-on.
How do you keep a pool screen enclosure clean and in good condition?
Rinse the screen panels and the frame with a garden hose from time to time to remove dust, pollen, and debris. Check the mesh for small tears and repair them early, because a small opening can grow. Open and close the access door to confirm that the hinges and latch move smoothly, and inspect the frame connections and fasteners after major storms. Aluminum frames resist rust, but any scratch or chip in the finish should be touched up. Keep the gutter and downspouts clear, and trim nearby branches so they do not rub against the screen. For questions about this installation, contact Screen Factory Florida and reference Order #20613.
More projects
Explore more screen enclosure and pool cage projects in the Florida area.
Our Services
From custom pool enclosures and screened lanais to motorized screens and hurricane shutters, we create outdoor spaces made for the Florida lifestyle. Every solution combines lasting protection, everyday comfort, and clean design – so you can enjoy more fresh air, fewer insects, and peace of mind in any weather.
Hi, I'm Alex, your project consultant. Fill in the details and I'll personally get back to you today.