Screen Pool Cage with Mansard Roof (Project #732), SW 52nd Street, Cape Coral, FL
Cape Coral
October 29, 2024
60 ft frontage, variable depth from 14 ft 9 in to 32 ft 10 in
This Cape Coral pool cage follows the angled house footprint with a dark bronze Mansard frame and No-See-Um mesh. Two 30 ft front Picture View spans preserve the waterfront outlook. A 5-inch Super Gutter, diagonal cable bracing, and two screen doors complete the enclosure around the pool and paver deck.
Project Overview
In Cape Coral, a waterfront pool called for an enclosure shaped around the existing home. The homeowners on SW 52nd Street wanted insect protection around the pool and deck without losing the open water view. The result was a dark bronze screen pool cage with a Mansard roof and a custom footprint following the angled house wall. The final drawing sets a 60 ft front width, variable depth, and 8 ft 4 in walls.
The Mansard roof gives the structure its signature profile, adding headroom and a finished appearance that complements the property. The frame uses 2 x 6 roof members, with 2 x 10 beams and 6 x 6 posts supporting two front Picture View spans of 30 ft each. These broad openings keep the waterfront visible from the pool deck.
Water management was a core design consideration. A 5-inch Super Gutter connects the enclosure along the existing roofline, following the change in direction at the house. Diagonal cable bracing supports the frame. Two screen doors provide access between the enclosed deck and the surrounding yard.
The enclosure is screened with No-See-Um mesh, selected for protection against small biting insects while retaining ventilation and visibility. Screen panels cover the walls and Mansard roof around the pool and paver deck, bringing the swimming and seating areas inside one continuous enclosure.
Homeowners considering a similar project can explore our pool screen enclosures and custom screen enclosures in Cape Coral.
Permitting was completed within 18 days, and the full build was finished in approximately four weeks. The project was completed on October 29, 2024, delivering a screened waterfront pool area with two broad viewing spans. The project cost around $21,000.
Before & After
How We Did It
Project #732 followed a complete design-build process, beginning with an on-site consultation and precise measurements of the Cape Coral pool area. After the materials and custom layout were approved, our team created the 3D visualization and engineering documentation for the dark bronze Mansard enclosure with two front Picture View spans. The permit was approved within 18 days, followed by material preparation and installation. After the required final inspection and client walkthrough, the completed pool cage was placed under warranty and ongoing company support.
Our specialist visited the Cape Coral property on SW 52nd Street to evaluate the existing pool deck, roofline, structural connection points, and backyard dimensions. Precise measurements were taken for the custom enclosure with a 60 ft frontage and 8 ft 4 in wall height. During this stage, the homeowners selected the dark bronze Mansard frame, No-See-Um mesh, two Picture View spans, 5-inch Super Gutter, and two screen doors. After the scope, materials, pricing, and timeline were confirmed, the contract was finalized.
Using the field measurements, our team developed a detailed 3D visualization showing how the new pool enclosure would integrate with the home and waterfront property. The engineering documentation specified the Mansard roof, 2 x 6 roof members, 2 x 10 front beams, 6 x 6 posts, and 5-inch Super Gutter connection. The final front elevation divided the 60 ft width into two 30 ft Picture View spans. This planning stage allowed the homeowners to review the finished appearance and confirm the structural layout before construction began.
Once the design and engineering documentation were complete, the permit package was prepared and submitted for review. Our team coordinated the required plans and supporting documents for the Cape Coral pool enclosure, addressing the structural details of the Mansard frame, Picture View beam layout, Super Gutter connection, and access doors. The permit was approved within 18 days, allowing the project to move into material preparation and construction.
Materials were prepared according to the approved engineering plans before installation began at the SW 52nd Street property. Our installers connected the 5-inch Super Gutter along the existing roofline and assembled the dark bronze aluminum Mansard frame with 2 x 6 roof members. The front was arranged as two 30 ft Picture View spans with 2 x 10 beams and 6 x 6 posts. Diagonal cable bracing and two screen doors completed the frame details. No-See-Um mesh was then stretched and secured across the enclosure. The complete project timeline was approximately four weeks.
After installation, our team checked the screen tension, frame connections, fasteners, Super Gutter attachment, diagonal cable bracing, both screen doors, and overall finish. The front Picture View sections were also included in the walkthrough. The project then proceeded through the required final inspection. Once approved, the completed enclosure and related documentation were presented to the homeowners during the final walkthrough. Project #732 was officially completed on October 29, 2024
Following the final handover, the completed pool enclosure was placed under Screen Factory Florida’s warranty and ongoing support. Our team remains available to assist with questions related to the No-See-Um mesh, bronze frame, Super Gutter, cable bracing, screen doors, or any structural component. The homeowners can now enjoy a screened, comfortable outdoor pool area in Cape Coral with dependable support after installation.
Want a Similar Result?
Get a free estimate for your project —
we’ll call you back within 15 minutes.
Design, Permits & Project Planning
Project #732 required careful planning to design a custom pool cage for the waterfront Cape Coral property. Engineering drawings established the Mansard roof geometry, 2 x 6 roof members, 2 x 10 front beams, 6 x 6 posts, 5-inch Super Gutter connection, and two screen doors. The 3D visualization confirmed the enclosure proportions, screen wall layout, and structural configuration before installation. Together with the site plan, these documents supported Florida code compliance, accurate fabrication, and permit approval within 18 days.
The engineering package defined the structural requirements for the custom pool cage, including 2 x 6 roof members, 2 x 10 front beams, 6 x 6 posts, Mansard roof geometry, frame connections, and attachment to the 5-inch Super Gutter. Each component was planned around the existing roofline and specified to meet applicable Florida Building Code requirements for the Cape Coral property. The final drawing coordinated two 30 ft Picture View spans, two screen doors, 8 ft 4 in walls, and the change in depth along the angled house wall. These details guided the frame layout and material preparation.
The 3D model provided a clear preview of the pool enclosure before fabrication and installation began. It showed the proportions of the dark bronze aluminum Mansard frame, two front Picture View spans, 5-inch Super Gutter, and No-See-Um screen sections while confirming the finished appearance. The model followed the angled house wall and variable-depth deck around the pool. Views from the swimming and seating areas clarified how the roof and wall panels would connect to the home, how the two doors would serve backyard access, and how the broad front openings would preserve the waterfront outlook.
The site plan positioned the new enclosure around the existing pool deck on SW 52nd Street while accounting for the home’s footprint, roofline, backyard access, and structural connection points. It confirmed the custom layout with a 60 ft front width and a depth changing from 14 ft 9 in to 32 ft 10 in. The planning coordinated the Super Gutter attachment along the angled house wall and the two screen doors. It also related the two Picture View spans to the pool deck and waterfront outlook. These decisions kept the cage aligned with the existing property rather than treating the available space as a simple rectangular footprint.
Frequently Asked Questions
Common questions about pool cage benefits, project cost, No-See-Um screening, permit requirements, and routine screen care.
Are pool screen enclosures worth it?
A pool screen enclosure can be worthwhile when insects and windblown debris make the pool area harder to use. Screening helps keep leaves and many insects away from the water and creates a more comfortable place to sit outside. A fine No-See-Um mesh targets smaller biting insects, while broad viewing spans can preserve the outlook from the deck. The trade-offs include the initial cost, screen maintenance, and some reduction in airflow and light. A screen roof is not waterproof, and the cage does not replace storm protection. Compare those benefits and limits with how often your household uses the pool.
How much does it cost to put a screened enclosure over a pool in Florida?
The cost depends on the measured deck layout, wall height, roof design, beam spans, mesh selection, and condition of the supporting structure. House connections, access, engineering, permitting, and any necessary concrete work also affect the total. Project #732 cost around $21,000 for a custom dark bronze Mansard pool cage with No-See-Um mesh, two Picture View spans, two doors, and a Super Gutter. That is a project example rather than a price for every Florida home. Ask for an itemized written estimate and compare proposals with the same screen material, framing, preparation, and installation scope.
What is the best screen for a pool enclosure?
The best screen depends on the insects, airflow, visibility, and wear conditions at your property. Standard 18/14 screening provides general insect protection with an open weave. A finer No-See-Um mesh is designed to exclude smaller biting insects, which makes it useful where midges are a concern, though it reduces airflow compared with regular mesh. Heavier polyester products offer different tear-resistance characteristics. Choose the actual product with your installer so that its use suits the frame and panel sizes. Check manufacturer care and warranty terms instead of assuming all fine screens perform alike.
Do you need a permit for a screen enclosure in Florida?
For a new structural pool screen enclosure in Cape Coral, plan on obtaining the applicable building permit before work begins. The city publishes a residential screen enclosure application guideline, and review depends on the proposed structure and site. Plans may need to identify the enclosure layout, framing, attachment details, and relevant pool barrier provisions. Requirements for a new cage differ from those for a simple repair, so confirm the permit category with the local building department. Keep the approved documents and inspection records. A permit for related pool work should not be assumed to cover every enclosure requirement.
How do you clean enclosure screens?
Start with a gentle rinse to loosen dust, pollen, and other surface debris. For stubborn dirt, use a mild soap solution and a soft brush or sponge, then rinse thoroughly without forcing the mesh out of its frame. Work carefully around the spline, door edges, and frame joints, and follow the screen manufacturer’s cleaning instructions. Avoid abrasive tools, harsh chemicals, and a close high-pressure jet that could damage the mesh or finish. Clean when buildup affects the view or airflow, and inspect for loose spline, tears, and door problems at the same time. Arrange suitable professional access for high roof panels.
More projects
Explore more screen enclosure and pool cage projects in the Florida area.
Our Services
From custom pool enclosures and screened lanais to motorized screens and hurricane shutters, we create outdoor spaces made for the Florida lifestyle. Every solution combines lasting protection, everyday comfort, and clean design – so you can enjoy more fresh air, fewer insects, and peace of mind in any weather.
Hi, I'm Alex, your project consultant. Fill in the details and I'll personally get back to you today.